WTB 3rd pedal with brake for 89 Pbody

[Darkapollo]

These are PITA to get from a junk yard since they are one piece. If anyone has one please let me know.

[midohiomoparsource]

I have an 87 Sundance RS I am parting. Turbo 5 speed. Are you talking about the clutch pedal assy? If so, I can pull it out and sell it. PM me if interested.

Matt

[spaceman]

if its a p body and ur going from auto to man. just change the the shaft that the petals hang from ,no need to put all that apart .it only holds the brake pedal .ive done it twice already on both off my shadows .its up to you ,just thought i would mension it,its one bolt and it slides out

[Darkapollo]

yeah the whole assembly. My brake pedal right now is falling appart and I want the smaller one. The axle looks to be a PITA to get to anyway so why not just replace the whole thing?

[midohiomoparsource]

To remove the assembly is a small job. Normally about 30 minutes or so. I am getting better at it the more I pull. I have pulled probably 5 or so. Anyhow, you have to remove the steering column, lower dash trim, upper dash trim, instrument cluster and then 6 bolts. Then remove clutch cable and a clip that holds the brake master cylinder rod to the pedal and then you have to work it out. It is alot easier to remove whole dash but I can do it by cutting the plastic out of the way on a junk car so I don't do all that.

Anyhow, if you need it, let me know and I will pull it for you. Last one I sold for $25.00 plus shipping.

Matt

[Darkapollo]

Yeah I'm starting to realize how much work it actually requires... I didnt have the time in the junkyard and i forgot my DW10mm socket so I had to do everything with a 3/8ths box-end... I cant seem to find the bolt on the U-Joint on the steering column though.
Im already pulling the dash so I can install my gauges.
$25 shipped is a deal.

[midohiomoparsource]

There is no bolt on the steering column. There are 4 10mm nuts on the bottom, then unplug it once it is dropped out and then pull towards the seat. It will come out then. May be stuck a bit and may have to tug.

If you want the one I have, let me know and we will work something out.

Matt

[Darkapollo]

The one I was trying to get from the junkyard had a bolt through the U-Joint, thats why I said that.

If you are willing to part with it then let me know where to send the check.

[dodgeshadowchik]

i have a clutch/brake pedal assembly from my shadow laying around in the garage if you want haven't found one yet. let me know!

[Darkapollo]

how much?