what kind of exhaust manifold are you running? I maybe interested...
what kind of exhaust manifold are you running? I maybe interested...
Sucks to see a beautiful car and so much hard work stripped down. I'm not in the market to buy anything at the moment so I won't ask, but I hope everything works out for you. Best of luck with any future projects
Ian
`88 Mercedes-Benz 300E - The daily
`92 Spirit ES - 2.5TI/523 swapped
`89 Lancer Shelby - 2.5TI/413 stock
`87 Shelby Charger - 2.2 with a few things done
`79 Bronco 4x4 - Everyone needs a 4x4
`76 Duster - Future big block stroker
www.FWDMopars.com
NOOOOOOO! Dont part it out!!!!!
i know when i feel overwhelmed with car stuff, I stop working on it and let it sit and then come back to it later but at a nice slow pace.
Brian
Originally Posted by turbovanman
-Turbos
1 GT3582R DBB .82ar $1000 (90 miles on it)Sold
1 GT3071R DBB .63ar $1200 (20 miles on it)
1 T68 std. journal .48ar stage V, .63ar stage V (2 turbine housings) not water cooled. $400
-Head
FM stage IV 782 CNC fully ported and 44mm intake, 36mm exhaust valves and up to .550 lift springs. $650
-Bottom end
Fully balanced. stock crank. shot peened T2 rods with ARP bolts, JE pistons .020 over. $400
-Custom intake 5.5L with short runner one piece $230 shipped
-MSD 7ALD-2 $150
-Snow performance water injection system progressive $150 Diesel(adjustable up to 70psi of boost)
progressive controller (gas) and 200psi adjustable pump (for the DYI) $75
-Aluminum rad. 400hp support with hoses $175
-Oil cooler with braided hoses and -an fittings ready to installed 400hp support with custom brackets $150
-72pph injectors $150
-Bosh adjustable FP regulator $120
-Cartech FP raiser 4:1 $150
-Cals (Chips only)
72pph stock cam $20 SMEC (Shelgame
72pph Taft S3 $20 SMEC (Shelgame)
72pph Taft S3 $20 SMEC (TU)
52pph Taft S3 $20 SMEC (Relentless)
-Wide Band $200 (Digital Display)
-Greddy Type S boost controller $150
-Greddy Type S BOV $50Sold
-Custom panhard rod adjustable $120
-Dawes $20
-Autometer EGT gauge $75 Complete
-Bully Dog 0-50psi boost gauge $50
-Viper logos $20 each (original)
-SMEC
(2) socketed $75 each
-Round tooth adj cam sprocket $75
-Fidanza Al. flywheel $150
Those interested feel free to PM me.
Reinaldo Moloon
Last edited by Rattlesnake; 04-27-2007 at 05:26 AM.
Do you have any pictures of the intake and head? How many miles on the head? Thanks!
I'm such a vulture. PM sent
Ian
`88 Mercedes-Benz 300E - The daily
`92 Spirit ES - 2.5TI/523 swapped
`89 Lancer Shelby - 2.5TI/413 stock
`87 Shelby Charger - 2.2 with a few things done
`79 Bronco 4x4 - Everyone needs a 4x4
`76 Duster - Future big block stroker
www.FWDMopars.com
pm sent
Im still buying the 3582! I understand you putting it up though cause I been so slow. Going to try to go to the bank tomorrow during lunch.
do you have any DP's with flanges for a standard T3 turbo?
ill take the greddy type s bov, and the egt guage if its an ultralite?
How much do you want for the tbi header without the wastegate? I don't plan on running a wastegate on the hot side.
Pm Sent !!!!
PM Sent!
Sold items:
-Snow performance water/inj. kit
-BOV
-EGT
-Dawes
-Flywheel
-Cam Sprocket
-Intake
Last edited by Rattlesnake; 04-28-2007 at 09:12 AM.
Sending money for intake
---- ---- ----, i missed it
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info