Buddy cracked his 782 slider head and sent out for a re-manned one. they sent a 782 roller. is that going to be off? by how much? should he swap his slider cam and rockers to the new head?
Buddy cracked his 782 slider head and sent out for a re-manned one. they sent a 782 roller. is that going to be off? by how much? should he swap his slider cam and rockers to the new head?
the cam will be advanced 4 degrees I believe...or its the other way around?
A roller cam with a square tooth sprocket is retarded 4 degrees.
Yep, this will move the powerband up a bit and may induce a bit of lag. As for running a slider, look under the cam caps, if they have the squirter grooves, you can use it, if not, roller or you'll wipe out the slider very fast.
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info