Results 1 to 8 of 8

Thread: IHI T3 divided inlet flange in mild steel?

  1. #1
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    IHI T3 divided inlet flange in mild steel?

    I need a flange exactly like your IHI T3 Divided Stainless Inlet Flange except in mild steel and 1/2" or even better 3/4" thick.
    Just thought I'd post to see if you'd be interested in doing a one-off part like that and if so, how much would I have in it?
    Thanks,
    Tony

  2. #2
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    Re: IHI T3 divided inlet flange in mild steel?

    Anybody home?

    I'm not in any kind of a hurry on this, but it would be nice to get a yes or no answer so I can pick up a piece of plate and get my O2 bottle filled if I'm going to have to cut the flange myself.

  3. #3
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Enfield, CT
    Posts
    685

    Re: IHI T3 divided inlet flange in mild steel?

    Try calling or emailing, don't think that they're on here all that often.

  4. #4
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    Re: IHI T3 divided inlet flange in mild steel?

    Quote Originally Posted by TurboGLH View Post
    Try calling or emailing, don't think that they're on here all that often.
    Evidently not. I'll give them a few more days and then send an email.
    Thanks,
    Tony

  5. #5
    Supporting Member Turbo Mopar Contributor
    Join Date
    Dec 2005
    Location
    Southern Wisconsin
    Posts
    400

    Re: IHI T3 divided inlet flange in mild steel?

    Any word on getting one of these? I could use one in 1/2 inch mild also.

  6. #6
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    Re: IHI T3 divided inlet flange in mild steel?

    I sent an e-mail and got a response back that they only do large runs on flanges, so no one-off or custom pieces.

  7. #7
    Supporting Member Turbo Mopar Contributor turbo2point2's Avatar
    Join Date
    Jan 2006
    Location
    Philly
    Posts
    946

    Re: IHI T3 divided inlet flange in mild steel?

    Last time I needed one I ordered it from here...

    http://www.full-race.com/catalog/pro...91a76117e96c10

    The listing says its 3/8 but mine came in at 1/2". Hope this helps.

    -Brian Slowe
    87 Shadow "BSX"
    8.58 @ 162

    86 GLHT
    10.62 @ 130

    05 SRT4
    12.1 @ ???.??

    06 Ram 3500

  8. #8
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    Re: IHI T3 divided inlet flange in mild steel?

    Thanks Brian!
    That looks like it will work perfectly for what I'm trying to do.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •