Results 1 to 17 of 17

Thread: any ideas

  1. #1

    any ideas

    this is kinda hard to explain but its been going on for awhile now. every time i let my car still for an hour or more when it start the idle drops after 30 seconds, not alot but it does. it will drop a few hundred rpms then run a lil rough then smooth back out. what im wondering is whats going after 30 secs. some sensor kicks or what?

  2. #2
    Admin- "Alexandria" Ken... Comes W/4 Car Garage Turbo Mopar Staff GLHSKEN's Avatar
    Join Date
    Dec 2005
    Location
    Kentucky
    Posts
    4,150

    Re: any ideas

    O2 sensor kicks on (heats up) and the car is going closed loop... If (from your other thread) you have issues starting it after 30 minutes... Could be from too much fuel. Put a good FI cleaner like Techron through the car..
    Ken Adler....
    Cars, A few (9)

  3. #3

    Re: any ideas

    tried that. plus i only use chevron w/ techron

    BTW 4 wire o2 if that matters

  4. #4
    Admin- "Alexandria" Ken... Comes W/4 Car Garage Turbo Mopar Staff GLHSKEN's Avatar
    Join Date
    Dec 2005
    Location
    Kentucky
    Posts
    4,150

    Re: any ideas

    It is still waiting for the coolant temp to come up to 70+ (if I remember correctly... ) there is also a timeout feature..

    When I lived out west, chevron was all my cars were filled with
    Ken Adler....
    Cars, A few (9)

  5. #5

    Re: any ideas

    what else could it be. bad wiring?

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: any ideas

    It could be leaking injectors. Next time you get it warm, unbolt the fuel rail, leave everything hooked up and lay it to the side on some newspaper. Keep checking on it and watch for fuel leaking out of the nozzles.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7

    Re: any ideas

    you dont remember posting in my leaky injector thread do you? well i fixed that and it still does this..

    what else

  8. #8
    turbo addict Turbo Mopar Contributor Dave's Avatar
    Join Date
    Dec 2005
    Location
    Canton, Ohio
    Posts
    3,305

    Re: any ideas

    Sounds like a dying fuel pump actually. Check fuel pressure at start up.

  9. #9
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: any ideas

    Quote Originally Posted by TurboXT
    you dont remember posting in my leaky injector thread do you? well i fixed that and it still does this..

    what else
    Nope, I don't.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  10. #10
    Garrett booster 3nglenn's Avatar
    Join Date
    Dec 2005
    Location
    Allegany county N.Y.
    Posts
    181

    Re: any ideas

    AIS acting up? Needs a good cleaning? Need more info on the vehicle. Codes?

  11. #11

    Re: any ideas

    no codes. TII conversion. what else do you need to know

  12. #12
    Garrett booster 3nglenn's Avatar
    Join Date
    Dec 2005
    Location
    Allegany county N.Y.
    Posts
    181

    Re: any ideas


  13. #13

    Re: any ideas

    it was the coolant temp sensor

  14. #14
    turbo addict Tony Hanna's Avatar
    Join Date
    Dec 2005
    Location
    Charleston, WV
    Posts
    3,223

    Re: any ideas

    Glad to hear you got it figured out.

  15. #15

    Re: any ideas

    ok my shelby starts up fine no matter what, but it has the famouse eratic idle. and this only happens after 30 seconds, when it goes into closed loop right? so what else is going on while that happnes that can cause this

    thanks

  16. #16
    turbo addict
    Join Date
    Dec 2005
    Location
    Seattle
    Posts
    7,065

    Re: any ideas

    Quote Originally Posted by turbovanman
    Nope, I don't.
    A postwhore should never forget.

  17. #17

    Re: any ideas

    bumb again

Similar Threads

  1. Gasoline air compressor. Need ideas.
    By Tony Hanna in forum Fabrication
    Replies: 7
    Last Post: 06-06-2007, 08:12 PM
  2. Ideas
    By Murphy in forum EFI Tuning
    Replies: 2
    Last Post: 12-07-2006, 06:57 PM
  3. K-Frame strengthening ideas???
    By glhs399 in forum Suspension, Brakes, Wheels, Traction
    Replies: 2
    Last Post: 01-23-2006, 11:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •