Early Block, Forged T2 Internals. Should be rebuilt. $125
85' T1 Longblock Complete! $100
89'+ Dodge Shadow Ground Effects and Spoiler $50 OBO Local Pickup only
Pics here: http://www.turbo-mopar.com/forums/showthread.php?t=5952
Ported TIII Intake (Blue) $150 Shipped to lower 48 (not ran since blasted/powdercoated) Pics here: http://www.turbo-mopar.com/forums/sh...ad.php?t=10348
MOPAR FORGED CRANK P4529444, 3.246” Stroke. This is the race forged steel crank for high performance applications. It is based on the turbo II forging. High strength, quality checked. Eight bolt crank flange for 1981-88 2.2L blocks. $300
Very mild Port 2-Piece Intake. Complete w/ 52mm TB, and Accufab Regulator and 52lbs/hr Injectors, rail, etc. etc. fittings and sensors not included. $300
TBI Header with flange that needs to be welded on $50
Spare G-Head (No cams / Rockers, springs and valves probably need to thrown out. Basically a good core to start with. $30
Spare Swirl Head Believe it came from a running car, should be redone however $40
A-520 gear set (87-88 Style Syncros) $50
A-520 Case with a small hole $25
A-568 Shifter with great condition knob $45
A-555 Shifter $30
New Front Motor Mount $15
Turbonetics Adjustable Wastegate Actuator Rod ends (Threaded) $8 Shipped
Powder Coated Valve Cover (Black) $75
Painted Valve Cover (Silver) Automotive Paint applied, blemishes on back $50
Shelby Charger Fender Scoops (if that's the name for them) Black, one has been repaired but still looks good. $100
84' Charger Spoiler (Says Charger 2.2 on it in Gold) $40
Charger Bolt on Hood Cowl. Has small notch in front as it was on a different body style. $30
Set of Stock T2 Injectors (2 Sets Available) $30
Complete Jet Kit by Holley for 2.2 $35
Dry Nitrous Kit. Bottle Is Full. Local Pick-Up Only $250
Nordskog A/F Gauge $40 (Vertical Bar Style, Black Face when turned off)
Pair of Brand New Bose Tweaters $45
Stock Rear Bobble Strut w/mount (Unknown Condition of Strut) $5
Magnecore Wires (One doesn't "click" all the way. Worked fine though) $35
T2 Radiator with IC Brackets out of Daytona. A few dents on the inlets/outlets as well as a small bend on one of the lips of the radiator cap mounting place. All could easily be bent back to shape. $60
420A Head $100