Results 1 to 10 of 10

Thread: What Crank can I use?

  1. 04-23-2007, 07:06 PM #1
    GLHNSLHT2
    GLHNSLHT2 is offline
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046
    Send a message via AIM to GLHNSLHT2 Send a message via MSN to GLHNSLHT2 Send a message via Yahoo to GLHNSLHT2

    What Crank can I use?

    Hi guys, thinking about going with a 2.5 tall block setup since I'm going with custom rods anyway. I'm going to run the 2.2 forged crank. But which one, the 87-88 or the 89+??
    Reply With Quote Reply With Quote
  2. 04-23-2007, 07:52 PM #2
    turbovanmanČ
    turbovanmanČ is offline
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167
    Send a message via MSN to turbovanmanČ

    Re: What Crank can I use?

    As far as I can recall, the 2.5 crank for the tall deck is the only one you can use, without modding the other cranks to fit. I could be wrong but I am sure thats what Allmotor keeps saying.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info
    Reply With Quote Reply With Quote
  3. 04-23-2007, 07:56 PM #3
    BadAssPerformance
    BadAssPerformance is offline
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: What Crank can I use?

    one of the 2.2L cranks fit... info might be in this thread

    http://www.turbo-mopar.com/forums/sh...ad.php?t=10337

    or this one

    http://www.turbo-mopar.com/forums/showthread.php?t=2948

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph
    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!
    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
    Reply With Quote Reply With Quote
  4. 04-23-2007, 08:23 PM #4
    turbovanmanČ
    turbovanmanČ is offline
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167
    Send a message via MSN to turbovanmanČ

    Re: What Crank can I use?

    Hahha, nice JT, I don't even remember my own thread. So to answer, 89+
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info
    Reply With Quote Reply With Quote
  5. 04-23-2007, 08:27 PM #5
    BadAssPerformance
    BadAssPerformance is offline
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,701

    Re: What Crank can I use?

    LOL, that was my guess but I thought I'd just post your threads instead

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph
    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!
    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.
    Reply With Quote Reply With Quote
  6. 04-23-2007, 10:14 PM #6
    GLHNSLHT2
    GLHNSLHT2 is offline
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046
    Send a message via AIM to GLHNSLHT2 Send a message via MSN to GLHNSLHT2 Send a message via Yahoo to GLHNSLHT2

    Re: What Crank can I use?

    so it looks like that CB Forged crank I have will bolt right in. Thanks guys.
    Reply With Quote Reply With Quote
  7. 04-24-2007, 12:40 PM #7
    2.216VTurbo
    2.216VTurbo is offline
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: What Crank can I use?

    Quote Originally Posted by GLHNSLHT2 View Post
    so it looks like that CB Forged crank I have will bolt right in. Thanks guys.
    Yeah but will that square drive pulley you need bolt to the CB cranks? Was your donor for the 16V stuff a CB?

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL
    Reply With Quote Reply With Quote
  8. 04-24-2007, 01:22 PM #8
    turbovanmanČ
    turbovanmanČ is offline
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167
    Send a message via MSN to turbovanmanČ

    Re: What Crank can I use?

    Quote Originally Posted by 2.216VTurbo View Post
    Yeah but will that square drive pulley you need bolt to the CB cranks? Was your donor for the 16V stuff a CB?
    Does the Masi head use a square tooth timing belt?
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info
    Reply With Quote Reply With Quote
  9. 04-24-2007, 04:37 PM #9
    2.216VTurbo
    2.216VTurbo is offline
    Supporting Member Turbo Mopar Contributor 2.216VTurbo's Avatar
    Join Date
    Dec 2005
    Location
    SoCal the OC
    Posts
    6,675

    Re: What Crank can I use?

    Quote Originally Posted by turbovanman View Post
    Does the Masi head use a square tooth timing belt?
    Um-huh

    AJ (no More Alan) 84 Rampage RT TIII/568 Quaife 87 GLHS dealer optioned Red 16V Masi/568/Quaife
    90 Masi 16V White/Ginger/Black
    89 TC Masi 16V Red/Ginger/Black
    86 GLHS #110 RoadRace Built 89 CSX-VNT Recaro Car
    89 Turbo Mini 'Woody' 85 GLHT 'RedBox'
    2014 Explorer DD'r 3.5Twin Turbo Ecoboost AWD and 500HP
    My profile page has over 20,000 views, I'm somebody LOL
    Reply With Quote Reply With Quote
  10. 04-24-2007, 09:21 PM #10
    GLHNSLHT2
    GLHNSLHT2 is offline
    turbo addict
    Join Date
    Dec 2005
    Location
    Spokane, Wa
    Posts
    9,046
    Send a message via AIM to GLHNSLHT2 Send a message via MSN to GLHNSLHT2 Send a message via Yahoo to GLHNSLHT2

    Re: What Crank can I use?

    Yep my 16v setup is CB baby!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules