Results 1 to 8 of 8

Thread: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

  1. #1
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    These are leftover from the '88 Shelby Z that I scrapped last year. Car was a TII/A-555 car.

    COMPLETE TII engine bay harness: This isn't just another junkyard harness. This harness is complete from the connectors under the dash to the headlamp and turn signal connectors. Every single inch of this harness has been cleaned, tested, and recovered with new wire loom and friction tape. All factory splices have been checked and resoldered where needed, and all splices are covered with high quality shrink tubing. Same goes for any damaged wires and splices I made (such as extending the ACT sensor lead). The battery and ground cables are NEW 4 ga. wire. It is set up for a passenger side battery, but putting it back to stock location is as easy as cutting the cables where needed and installing new terminals. I have an easy 20 hours into this harness. Includes the stock '88 TII/5speed SMEC, $200 plus shipping

    Turbos Unleashed custom SMEC for TII: Paul burned this computer for me in the spring of '95. It is set up for a 2.2 with an A-555, 2 piece intake, Taft S1 cam, mildly ported head w/ stock valves, ported exhaust manifold, TU Super 60 Turbo with .63 A/R turbine and 2.5" swingvalve, full 3" exhaust, small NPR intercooler, +40% injectors, and a 3 bar MAP. Dual 18/23psi boost settings, instructions included. Buyer assumes all risk with compatability. I'd like to see $200 plus shipping for this.

    Power mirrors, both sides, fit '87-'91 Daytonas without T-tops. Could stand to be repainted to be really nice, but still in good condition. $40 plus shipping.

    I'll have pics posted by tomorrow evening at the latest, PM if interested.
    Last edited by supercrackerbox; 03-17-2007 at 10:31 AM.

  2. #2
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors












  3. #3
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    Bump.

  4. #4
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    TU calibration sold pending payment. I am open to offers on the other items.

  5. #5
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    Bump.

  6. #6
    turbo addict
    Join Date
    Oct 2006
    Location
    Oswego, New York, United State
    Posts
    1,568

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    Was the cal sold?

  7. #7
    Supporting Member Turbo Mopar Contributor supercrackerbox's Avatar
    Join Date
    Dec 2005
    Location
    Firth, Nebraska
    Posts
    5,022

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    I have a deposit on it. If the buyer changes his mind, would you like me to let you know?

  8. #8
    turbo addict
    Join Date
    Oct 2006
    Location
    Oswego, New York, United State
    Posts
    1,568

    Re: FS: Wiring harness, stock SMEC, TU SMEC, mirrors

    Yes please. I kinda wish I saw this earlier lol.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •