Pictures of your cylinder heads from the rear with both manifolds on and turbo on. 1 piece, 2 piece, tbi, stock, TU, anything and everything. Thank you in advance.- Jaim
Pictures of your cylinder heads from the rear with both manifolds on and turbo on. 1 piece, 2 piece, tbi, stock, TU, anything and everything. Thank you in advance.- Jaim
What 'cha buildin'? Are you looking for how things are arranged or are you wanting to get ideas?
Mike
i tried,it's the best i had on file.
I'm building another intake manifold for a fellow Ontario member. I need the pictures partly for ideas and partly to try to guess the best possible shape of the plenum area.
Devlish, that is helpfull to see the angles of the exhaust compared to the intake. Thank you.
It wasn't a big deal when I built mine because I used a TBI header and they really drop down and out of the way. The guy who I'm making this for has a ported stock exhaust manifold. Clearance is an unknown because I don't have a turbo to put on the spare head, exhaust manifold and intake to check clearance.
Please keep those pictures coming.
How's this-
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Neat header. Did you make that one?
Actualy, I found most of what I need from the "pictures of pets" thread. The one Damon posted is almost exactly what I was after, but on a bit more of a lean to get a good view of the area where the manifolds are closest together.
Clearance is tight on an "L" body. Even worse with a strut tower brace.
Of course, I'd still love to see more pictures if anybody has some stashed on their hard drives.- Thank you.
When I get home later I'll go through my least builds pics. If you wait a few weeks more I'll show you pics of a T3 turbo on my chrysler manifold.
Post up what you can. I need a little help here. Thanks
Simon has a bunch. You should get on him hehehe
2022 Viper runs 9s
call me crazy but is that just some ts and some bends from like irrigation pipe?
Damon
"America is all about speed...hot, nasty badass speed."
-Eleanor Roosevelt