High Nickel content, low core shift, "C" casting commonblock. Bored .020, Torque plate honed. Can get exact bore measurements if serious. $200.
Heath
High Nickel content, low core shift, "C" casting commonblock. Bored .020, Torque plate honed. Can get exact bore measurements if serious. $200.
Heath
BUMP
Including all accessories and a head. only rods and pistons missing for the major parts.
I have a gasket set available as well.
The machine shop checked the bore diameters without a torque plate installed they are as follows:
#1 3.4682
#2 3.4680
#3 3.4680
#4 3.4680
They were machined and honed for a set of .020 venolias that I had that cam from Cindy at FWD performance. ~~Heath
is that a turbo common block or n/a. 2.2 or 2.5?
Turbo Common block. 2.5, but as with all commonblocks, if you put a 2.2 crank rods and pistons in it, then it's a 2.2.
got it today nice block thanks