Results 1 to 4 of 4

Thread: Injector questions

  1. #1
    boostaholic
    Join Date
    Dec 2005
    Location
    South Side Indy
    Posts
    1,221

    Injector questions

    Ok....I have a '90 T1 2.5 engine with a VNT intercooler set-up. Will T2 injectors be an upgrade from the stock 2.5 T1 injectors? I want extra fuel, but I'm not sure I quite want or need to go with +20's yet. What about "803" injectors?

  2. #2
    Hybrid booster
    Join Date
    Aug 2006
    Location
    Miami, Fl
    Posts
    615

    Re: Injector questions

    I think that +20's is what comes next after what you got right now.

  3. #3
    turbo addict
    Join Date
    Oct 2006
    Location
    Indianapolis, IN
    Posts
    2,065

    Re: Injector questions

    T2 and 2.5 T1 injectors are the same...

  4. #4
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Injector questions

    Depends what boost your running, stockers should be good for around 15-16 psi on a stock turbo engine. +20's you need a cal or an AFPR or it will run pig rich if you don't turn the base fuel pressure down.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •