mine doesnt flash them either....
mine doesnt flash them either....
My GLHS sgII Lm would not flash the codes when I first got my omni, but when I replaced the cluster it would. I think it was a bad bulb for the power loss lamp in the cluster.
Your probably onto their problem. My stage 2 has had no problems flashing codes, other than the time I put a hosed cal in itOriginally Posted by cordes
my cel works. it comes on with the key, just does not flash codes. i have swapped in the stock lm and it will give codesYour probably onto their problem. My stage 2 has had no problems flashing codes, other than the time I put a hosed cal in it
Simon, I ran the test with the jump to the coil, it's a pretty cool test. It's fun to hear the fuel flowing thru the rail, for a second a though damm there's a leak in my fuel system. Anyhow when I press my return line the pressure jumps quickly to 100psi.
Finally found the problem, thank god!It turned out to be a bad ground. The one brown wire that bolts into left side of the cylinder head. It was barely making contact at the plug. I'll look at the schematics and see what circuit it belongs to, it must be a very important ground cause the car won't even start if is not connected.
By the way, I found my top endThe car now seems to go on and on and on, allmost as if I had taller gears all of the sudden. I'm sure I need better calibration, that will be the next step along with a better intercooler.
Thats awesome, glad to hear,
1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS!12.57@104 :O)
1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
2004 GSW TDI, 5 speed, fully loaded, modified.
Aurora ignition wires for sale. Link to info
Super60 roller cams or custom/billet cams. Link to info
Posting Permissions
Reply With Quote