I know there are several people waiting for 782 heads, and I will have them finished soon! I had already started on this 287 head a while ago, so I decided not to put it off any longer. I have my own flow bench, so I can do back-to-back testing and still take my time. My bench does not read as high as many of the others, but it is very accurate, so judge by the increase, not the "Big Number".
This head will be assembled and ready to bolt on once buyer chooses springs.
Included are:
Ported and polished 287 Bathtub "G" Head
Mopar Performance Intake Valves (std)
FWD Performance +1mm Stainless Exhaust Valves
- back cut and swirl polished
'89 TBI Roller Cam (round tooth gear for common block engines)
Roller followers
Drilled for larger head bolts
Surface Cut .007" to ensure a good head gasket surface
New mopar valve seals
Mopar Performance Hardened Valve Locks
Your choice of valve springs
- MP 061 springs +$78
- Heavy Duty +$15
- Stock turbo +$0
PICTURES:
http://img.villagephotos.com/p/2005-...05Ghead013.jpg
http://img.villagephotos.com/p/2005-...05Ghead020.jpg
http://img.villagephotos.com/p/2005-...05Ghead017.jpg
http://img.villagephotos.com/p/2005-...05Ghead018.jpg
http://img.villagephotos.com/p/2005-...05Ghead029.jpg
INTAKE Flow numbers are:
LIFT - STOCK SWIRL / STOCK G / FINISHED @28"
.100 - 45 / 49 / 52
.200 - 78 / 99 / 106
.300 - 107 / 126 / 134
.400 - 129 / 136 / 155
.450 - 134 / 143 / 162
.500 - 137 / 144 / 169
EXHAUST Flow numbers are:
.100 - 38 / 38 / 39
.200 - 66 / 76 / 76
.300 - 83 / 100 / 105
.400 - 93 / 113 / 123
.450 - 96 / 118 / 133
.500 - 99 / 120 / 138
This head was perfectly straight and no cracks. After all porting was complete, I had the head jet washed twice to make sure all the oil and coolant passages were clean. This head is in excellent condition and doesn't even have cracks between the valves!
If you would like to see some of my other work, you can look here:
http://www.turbo-mopar.com/forums/sh...ad.php?t=10208
Price is $499.
Don't hesitate to PM or email me with any questions.
Thanks for looking,
Tyler Van Lant
tvanlant@msn.com