Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: Need someone to measure some SRT4 plug wires for me!

  1. #1
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Talking Need someone to measure some SRT4 plug wires for me!

    Hey guys, need some measurements as can't find any wires around here.

    I need boot length tip to flange, wire length and do you want 90 deg boots or the stock straight, pics would be great too. TIA,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  2. #2
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,699

    Re: Need someone to measure some SRT4 plug wires for me!

    I'd go get you a picture of a set of Magnecor's in my garage but it is cold out here in Chicago, and the next time I step outside i will be getting in the Dakota to go to the bar, LOL...

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  3. #3
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Sweet, thanks. Kevins dragging his asss. I am off to the nudie bar in about 1/2 hours,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  4. #4
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,699

    Re: Need someone to measure some SRT4 plug wires for me!

    Damn, I'm just going to throw some darts and drink a couple beers, that sounds waaaay more fun!

    EDIT: damn you got a lotta posts! LOL

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  5. #5
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by BadAssPerformance View Post
    EDIT: damn you got a lotta posts! LOL

    He does????



    Frank

    hehehehe
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  6. #6
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by Frank View Post
    He does????



    Frank

    hehehehe
    Thats just nasty Frank,

    Nevermind, Kevin coughed up the numbers.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  7. #7
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: Need someone to measure some SRT4 plug wires for me!

    HAHAHA. I guess I will fix it.
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  8. #8
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Thanks, don't short me, I was at 8000,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  9. #9
    Heroes never die, they just reload! Turbo Mopar Staff Frank's Avatar
    Join Date
    Dec 2005
    Location
    California, MD
    Posts
    9,183

    Re: Need someone to measure some SRT4 plug wires for me!

    Liar!
    Frank Katzenberger
    Squirrel Performance - Home of the best turbo calc!!!
    http://www.squirrelpf.com


    91 Daytona Shelby - It is getting there

    87 Shelby CSX #418 - Near stock is a good thing!

    94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top



    "... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"



    Visit the new Knowledge Center today!

    Check out the one and only Shelby Dodge Registry!

  10. #10
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by Frank View Post
    Liar!

    That hurts, sniff, sniff,

    Did you check out that ebay ad, please. I need to know what the hell that guy is saying. Scroll down to the questions asked.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  11. #11
    turbo addict
    Join Date
    Mar 2006
    Location
    Michigan
    Posts
    1,784

    Re: Need someone to measure some SRT4 plug wires for me!

    the boot length is the same as the reg neon or 2.4
    Last edited by Speedeuphoria; 02-03-2007 at 07:10 PM.

  12. #12
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by Speedeuphoria View Post
    the boot length is the same as teh reg neon or 2.4

    The same as any 2001-up 2.4 yes....
    The same as any other neon, no.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  13. #13
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,699

    Re: Need someone to measure some SRT4 plug wires for me!

    According to Magnecor's catalog, '95-'00 Neon/Stratus DOHC & '03-'05 SRT-4 use the same wires.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  14. #14
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Great, thanks guys.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  15. #15
    turbo addict
    Join Date
    Mar 2006
    Location
    Michigan
    Posts
    1,784

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by contraption22 View Post
    The same as any 2001-up 2.4 yes....
    The same as any other neon, no.
    the boot length is the same for all, the srt's have a diff plug(longer) and different VC. Trust me I had to research it to put the SRT4 vc on my '96 head. Milled the spark plug holes on the vc down ~1/2" due to the diff plugs and filled 2 holes that are not used

  16. #16
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by BadAssPerformance View Post
    According to Magnecor's catalog, '95-'00 Neon/Stratus DOHC & '03-'05 SRT-4 use the same wires.
    Well according to me, I took the magnecores off my 98 DOHC neon and tried to put them on my SRT-4 and they didnt work! This was back in 2004.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  17. #17
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    Quote Originally Posted by contraption22 View Post
    Well according to me, I took the magnecores off my 98 DOHC neon and tried to put them on my SRT-4 and they didnt work! This was back in 2004.
    Yep, around 01, the boots got longer,
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

  18. #18
    See me ride out of the sunset... Turbo Mopar Staff BadAssPerformance's Avatar
    Join Date
    Dec 2005
    Location
    Chicagoland!
    Posts
    27,699

    Re: Need someone to measure some SRT4 plug wires for me!

    How much longer?

    Page 8 of the PDF which is Page 5 of their catalog:

    http://www.magnecor.com/magnecor1/files/catalog.pdf

    I know a few guys with the 45231 or 49231 Magnecor's in their SRT-4's with no issues.

    JT
    SDAC Director
    SDAC-Chicago President
    JOIN SDAC and your local Chapter TODAY! - SUPPORT the CLUB that supports YOUR HOBBY!
    87 Shelby Z - 10.50@141.66mph
    87 CSX #751 Clone - 12.88@102.88mph

    www.badassperformance.com
    Check out Turbo-Mopar Times!
    Submit your 1/4 mile times HERE!!

    Support SDAC! Join Today!
    "I'm not some pro athlete with a bajillion dollars, I'm just an every man"
    Note: The information and any images provided in this post are not for distribution outside this forum without the author's permission.

  19. #19
    Super Moderator Turbo Mopar Staff contraption22's Avatar
    Join Date
    Dec 2005
    Location
    Havertown, PA
    Posts
    9,517

    Re: Need someone to measure some SRT4 plug wires for me!

    JT, tell them to make sure the terminals on the wires are actually contacting the plugs. Mine weren't. The ones that are on my SRT-4 now are PN 45428.
    Mike Marra
    1986 Plymouth Horizon GLMF "The Contraption" < entertaining sponsorship offers
    Project Log:
    http://www.turbo-mopar.com/forums/showthread.php?69708-The-Contraption-2013-14&highlight=

  20. #20
    Buy my stuff!!!!!!!!!!! :O) Turbo Mopar Vendor turbovanmanČ's Avatar
    Join Date
    Dec 2005
    Location
    Abbotsford, BC
    Posts
    44,167

    Re: Need someone to measure some SRT4 plug wires for me!

    I will get some pics of both boots, the SRT and newer boots are aprox 1/4" longer or slightly more.
    1989 FWD Turbo Caravan-2.5 TIII, GT35R, auto, a/c, cruise, pwr windows/locks, fully loaded with interior and ran with full exhaust. RETIRED FOR A FEW YEARS! 12.57@104 :O)
    1984 Chev Getaway van, 6.2 Diesel with a remote mounted turbo setup burning WMO-For sale.
    2003 GSW 2.0L TDI, auto, fully loaded, modified, 360K-wife's.
    2004 GSW TDI, 5 speed, fully loaded, modified.

    Aurora ignition wires for sale. Link to info

    Super60 roller cams or custom/billet cams. Link to info

Page 1 of 2 12 LastLast

Similar Threads

  1. Now selling Aurora spark plug wires.
    By turbovanmanČ in forum General Vendor Area
    Replies: 85
    Last Post: 04-28-2019, 07:36 AM
  2. upgrade plugs and wires??
    By turbokid in forum SRT-4 Neon & PT Cruiser
    Replies: 4
    Last Post: 06-04-2008, 12:03 PM
  3. Distributor side of plug wires are always loose
    By Clay in forum Electrical & Fuel System
    Replies: 19
    Last Post: 11-01-2007, 09:29 AM
  4. What are good plug wires for the car?
    By Dodgeglht in forum Maintenance & General Tech
    Replies: 2
    Last Post: 08-26-2007, 08:38 PM
  5. FS: Custom MSD wires for 8V 2.2/2.5
    By rbryant in forum Parts For Sale
    Replies: 7
    Last Post: 01-09-2007, 10:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •