My 1st gen. DSM blow off valve is leaky. What's a good aftermarket BOV that will bolt to the DSM flange? I'd rather have something that isn't so loud. Let me know if you have something for sale also.
My 1st gen. DSM blow off valve is leaky. What's a good aftermarket BOV that will bolt to the DSM flange? I'd rather have something that isn't so loud. Let me know if you have something for sale also.
Kevin Isenberg EVERYTHING is for sale!
I've heard the DSM flange can be modified to accept a Greddy BOV. I've never done it, but it looks like it would only need to have two holes drilled and tapped.
I'll ask on my local forum. There are a few DSM guys there.
Kevin Isenberg EVERYTHING is for sale!
Yeah the Greddy Type S is supposed to be almost a direct bolt up. You have to redrill a couple holes but it'll match up. Just the BOV vent is a little bigger than the flange hole.
There's actually a site somewhere showing how it's done...
Ian
`88 Mercedes-Benz 300E - The daily
`92 Spirit ES - 2.5TI/523 swapped
`89 Lancer Shelby - 2.5TI/413 stock
`87 Shelby Charger - 2.2 with a few things done
`79 Bronco 4x4 - Everyone needs a 4x4
`76 Duster - Future big block stroker
www.FWDMopars.com
You can get this kind of thing in for other brand name BOVs too:
http://www.fasterthanthem.com/produc...3&cat=0&page=1
I've bought from them a couple times, including a genuine TurboXS RFL. Seemed like an OK company to do business with. If you look around, you could probably find something for cheaper, especially if you don't need that 90' adapter. What BOV were you going to replace the 1g DSM with?
There's no specific brand that I'm looking for. That link does give me an idea. I could fab up something that will bolt onto my flange. Thanks Jeremy.
Kevin Isenberg EVERYTHING is for sale!