Need help... need shock measurements...
With the shock assembled with the screen, I need the length of the assembly -- from lower hub/spindle bolt to the upper mounting surface. I am mainly looking the difference in length. Just not if it is a stocker or lower spring installed and how much.
P-Body/Daytona:______________
1st Gen Neon:______________
2nd Gen Neon:______________
Thanks!
Frank
Frank Katzenberger
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
Anyone????
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
installed? or just sitting on the floor?
sitting on the floor is prefered.
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
Like this frank? this was from a stock 87 Shelby Z strut with the stock spring
If you need more specific measurements let me know I got the daytona strut downstairs
I had to login to see it, but perfect!!! Now I just need this information for the first and second gen neon. However I dont need the bolt hole distances since they are the same as the daytona/shadow.
Frank
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
No problem
Frank, are you still needing these measurements? I have a 1st Gen ('98 R/T) and a 3rd Gen ('03 SRT-4) Neons in addition to my K-car based old turbo Mopars. Let me know and I'll go out and take some dimensions for you.
John M. Fleck
'83 Dodge Rampage 2.2 w/ 2.5L Turbo 14.79@94
'87 Shelby Lancer #213 14.99@94
'89 Chrysler LeBaron GT Turbo 'vert 15.88@92
'92 Dodge Spirit R/T 13.50@104 ; 13.34@102 on slicks
'98 Dodge Neon R/T 15.66@89
'03 Dodge SRT-4 13.91@98
That would be awesome Fleckster...
I just need the 1st and 3rd Gen ones...
Thanks,
Frank
Squirrel Performance - Home of the best turbo calc!!!
http://www.squirrelpf.com
91 Daytona Shelby - It is getting there
87 Shelby CSX #418 - Near stock is a good thing!
94 Bronco 302 XLT - Shorty Headers, 3" exhaust, cold air intake, & Soft top
"... to get the best out of it, you have to go beyond the line. Where bravery becomes insanity. Shall I turn into this hairpin bend at a 100mph? Why not!"
Visit the new Knowledge Center today!
Check out the one and only Shelby Dodge Registry!
Posting Permissions
Reply With Quote