Results 1 to 19 of 19

Thread: 85 GLH's sort block and A525 tranny in AZ

  1. #1
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    85 GLH's sort block and A525 tranny in AZ

    85 GLH's sort block and A525 tranny in AZ plus stock clutch.
    I upgraded and they are no use to me anymore.

    Compression was 110, 90, 70, 100. It needs a rebuilt.
    Tranny shifted fine, no noise.

    $10, come pick them up they're yours.

  2. #2
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    Last bump before I junk them this weekend.

  3. #3
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Clemson, SC
    Posts
    673

    Re: 85 GLH's sort block and A525 tranny in AZ

    If you are going to junk them, at least pull the rods out of the motor...they are the same as the TII rods once you get the small ends modified for the floating wrist pin. They should fetch at least a little bit of $$$.

    For that matter, do you have the flywheel from that combo, or are you using it with the upgraded parts? If you have it, I'd be interested in it.

  4. #4
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    $10 + shipping, flywheel is yours.

  5. #5
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Clemson, SC
    Posts
    673

    Re: 85 GLH's sort block and A525 tranny in AZ

    How much is shipping to 29630? $10 sounds like good action for that.

  6. #6
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    I'll have to take it off to weight it tomorrow.
    I'm guessing the weight right now, shipping is about $21.

  7. #7
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Clemson, SC
    Posts
    673

    Re: 85 GLH's sort block and A525 tranny in AZ

    Let me know what the official price is for shipping.

  8. #8
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    If Matt doesnt want them (and I hope he doesnt ), I DEFINITLY do. Just had the 525 in my GLHS x-plod and REALLY need a tranny to get by while new motor and hybrid tranny are built. And I could always use motor parts. LMK.

  9. #9
    Hybrid booster
    Join Date
    Dec 2005
    Location
    Clemson, SC
    Posts
    673

    Re: 85 GLH's sort block and A525 tranny in AZ

    I only want the flywheel. If you want the trans, it's all yours.

  10. #10
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    Quote Originally Posted by The S is Silent
    I only want the flywheel. If you want the trans, it's all yours.
    I just re-read and realized that. Cool. Now I just have to figure out how to get them from Mesa to here.

  11. #11
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    87glhs232,

    So, you want the short block and tranny?

  12. #12
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    Quote Originally Posted by tryingbe
    87glhs232,

    So, you want the short block and tranny?
    Yep. I'll PM ya.

  13. #13
    Garrett booster
    Join Date
    Jan 2006
    Location
    Prescott AZ
    Posts
    127

    Re: 85 GLH's sort block and A525 tranny in AZ

    I'm up in prescott, can make a trip down there and bring the parts out to Tehachapi (mojave, palmdale, bakersfield area) in late Feb or late march if shipping is a bear or if you can wait. LMK!

  14. #14
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    The S is Silent
    Sorry, I went out of time today. I'll pull the flywheel out tomorrow for sure.

    87glhs232
    pm replied.

    Phreakish
    I'm pretty sure 87glhs232 got it covered.

  15. #15
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    Thanks Phreakish, I'm driving out next weekend though.

  16. #16
    Garrett booster
    Join Date
    Jan 2006
    Location
    Prescott AZ
    Posts
    127

    Re: 85 GLH's sort block and A525 tranny in AZ

    ah, just figured I'd offer, I know how hard it is for us in the west to find parts and cars

  17. #17
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    Quote Originally Posted by Phreakish
    ah, just figured I'd offer, I know how hard it is for us in the west to find parts and cars
    Very true.

  18. #18
    turbo addict
    Join Date
    Dec 2005
    Location
    Mesa, AZ
    Posts
    7,352

    Re: 85 GLH's sort block and A525 tranny in AZ

    The S is Silent
    Shipping cost PMed.


    87glhs232
    Just to let you know, bring a lot of cardboard boxes and old clothe. The engine/tranny is very grease/dirty.

  19. #19
    boostaholic
    Join Date
    Dec 2005
    Location
    USAville, USA
    Posts
    1,140

    Re: 85 GLH's sort block and A525 tranny in AZ

    Quote Originally Posted by tryingbe
    The S is Silent
    Shipping cost PMed.


    87glhs232
    Just to let you know, bring a lot of cardboard boxes and old clothe. The engine/tranny is very grease/dirty.
    thanks for the warning!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •