Page 1 of 4 1234 LastLast
Results 1 to 20 of 65

Thread: project derice-ing (pics)

  1. #1
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    project derice-ing (pics)

    hey everyone! after a long search of a body for my shadow i have found one not rotted out and with very minimal rust for these cars being plagued by paint peeling.

    anyways, i'd like to ask some opinions here. the whole reason for finding the blue car is to replace certain body mods to my red car that cannot be removed. however, there are some aspects i liked about the red car's body kit such as the wing (its an actual wing off the evolution lancer) and the sideskirts. so i guess the question is.. ditch 'em or keep 'em?

    here's some pictures of the "new" car and the red car.







    "I'll give you anything you'll ever need and I'll find a way to turn you into a monster."

  2. #2
    Hybrid booster
    Join Date
    May 2006
    Location
    Carol Stream, Il
    Posts
    895

    Re: project derice-ing (pics)

    WTF happened to that poor red car!!!!

    Sorry, I'm new to this story, please elaborate....

  3. #3
    boostaholic
    Join Date
    Jan 2006
    Location
    Bridgeport WV
    Posts
    1,329

    Re: project derice-ing (pics)

    I kind of like wing.

  4. #4
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    Re: project derice-ing (pics)

    long story short:


    basically i really want to tone this down. the amount of scoops annoy me now. unfortuanlly, most of the body kit is perminatly attached to the body so i was forced to find another body. lol!

    "I'll give you anything you'll ever need and I'll find a way to turn you into a monster."

  5. #5
    boostaholic
    Join Date
    Jan 2006
    Location
    Bridgeport WV
    Posts
    1,329

    Re: project derice-ing (pics)

    Why didnt they just get and EVO since the wing and the hood match one.If the hood has the vents in the back side it could help out a little and well the front bumper isnt that great looking at all.

  6. #6
    turbo addict
    Join Date
    Dec 2005
    Location
    Nunnelly, TN
    Posts
    2,173

    Re: project derice-ing (pics)

    Quote Originally Posted by dodgeshadowchik View Post
    I can only imagine the purpose of that. I'm guessing that's for when your A/C breaks down and it's really hot outside.

    If it were me, I'd transfer all your good parts to the blue can and set the red one on fire.
    Kevin Isenberg EVERYTHING is for sale!

  7. #7
    turbo addict
    Join Date
    Dec 2005
    Location
    White Rock/Surrey B.C.
    Posts
    1,578

    Re: project derice-ing (pics)

    Yeah the blue car is a beauty. Transfer the drivetrains and sell the red one to some kid :P

  8. #8
    turbo addict slasky's Avatar
    Join Date
    Dec 2005
    Location
    Rochester, NY
    Posts
    1,839

    Re: project derice-ing (pics)

    Ditch everything on the red car except the drive train. Make sure what's left of the red car gets crushed so no one will have to endure the pain and suffering you just bestowed on us.
    SDAC member "It's not the ride, it's the rider."

  9. #9
    Invisible Turbo Mopar Contributor mcsvt's Avatar
    Join Date
    Dec 2005
    Location
    Poughkeepsie, NY
    Posts
    3,518

    Re: project derice-ing (pics)

    When did that happen to your car (the accident)? The blue car does look pretty good. I guess it depends if you want to keep 4 doors, or go with 2. How is the turbo project coming along?
    -Gary Mazzone-
    1986 GLHS #168

  10. #10
    Garrett booster
    Join Date
    Jan 2006
    Location
    Sterling Heights MI
    Posts
    149

    Re: project derice-ing (pics)

    I like the blue car better. Like mentioned swap the drivetrain from the red car to the blue car

  11. #11
    Hybrid booster
    Join Date
    Nov 2006
    Location
    Tulsa, Oklahoma
    Posts
    669

    Re: project derice-ing (pics)

    it all depends what look your going for. im not too keen on the roof scoop, but the skirts and hood looked ok to me. not a big fan of wings due to the purely asthetic use sub-80+mph. i personally am gonna go for a nice clean look on mine, i.e. sleeper. BTW, you gonna stuff the 24v into the blue car then? (what year is the blue one, due to the K-member/A-arm differences)

  12. #12
    boostaholic BIGBRUDDA's Avatar
    Join Date
    Dec 2005
    Location
    cincinnati
    Posts
    1,070

    Re: project derice-ing (pics)

    I had an identical blue/silver Shadow ES. Very cool, loved the paint scheme. Dropped the body a little, installed fat tires/pumpers.IT WAS HAPPENIN!! Mine was a V6 with "turbo flow" muffler,IT SNARLED
    You certainly won't miss all that body work come wash-n-wax time.

  13. #13
    turbo addict JDAWG's Avatar
    Join Date
    Dec 2005
    Location
    Hagerstown, Maryland, United S
    Posts
    2,494

    Re: project derice-ing (pics)

    yea i like the blue car, but I dont like the silver bottom. Im not a fan of 2-tone, I would paint it all one color.

  14. #14
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    Re: project derice-ing (pics)

    thanks for the input.

    the blue car is a 1992. and yes, that'll be the car getting the 24v engine eventually. for now it'll get the drivetrain that's in the red car. (3.0L A543 with turbo) what i like best about the blue one is it's already a stick! i had to convert the red one over. oh, and the red one was not in an accident. i just started to take it apart...and realized that i was going to need antoher car to fix this. lol! the rear window is taped over because that window motor quit working.

    the blue car will need a new paint job. it stated to peel off on the roof; but it's not terrible right now. however, i believe the only way to fix it is to take it down to metal and reprime it then paint it. (as it was chrysler's primer that caused the paint peel, right?)

    "I'll give you anything you'll ever need and I'll find a way to turn you into a monster."

  15. #15
    Hybrid booster
    Join Date
    Nov 2006
    Location
    Tulsa, Oklahoma
    Posts
    669

    Re: project derice-ing (pics)

    i thught the primer was fine but that the final coating sucked *shrugs* my primer is still there where the paint peeled away lol.

    92, hmm. stronger cast A-arms and K-member i believe, but rear discs were circa 93 IIRC (still want to get some rear discs myself) and i like the shadow grill better than the plymouth one maybe ill pick one up for my car....

    also, where did you pick up those skirts/ground effects? those off a similar car or somesuch?

  16. #16
    Hot Certified Christians at TD! Turbo Mopar Staff Directconnection's Avatar
    Join Date
    Dec 2005
    Location
    Nunya-Maine
    Posts
    6,027

    Re: project derice-ing (pics)

    Quote Originally Posted by Whorse View Post
    Yeah the blue car is a beauty. Transfer the drivetrains and sell the red one to some kid :P
    Exactly. The red one... well, looks like someone molested a poor shadow with a supra's front end.

    Besides, nothing pishes off a ricer more than a fwd 4-banger that looks nice, but isn't riced out with non-functional body parts.

    If it were me, I'd track down '89 CSX body pieces for your new blue shadow. That is what i hve always wanted to do, but couldn't afford to do so.
    Quote Originally Posted by 22mopar
    have a look at my feedback on the forum. all positive.

    Steve

    '90 VNT competition package Shadow - T-III SC6262 conversion/restoration
    '91 Spirit R/T - white
    '91 Spirit R/T - white
    '92 IROC R/T - red
    '67 Barracuda 273 now, 440/727 awaits....

  17. #17
    Hot Certified Christians at TD! Turbo Mopar Staff Directconnection's Avatar
    Join Date
    Dec 2005
    Location
    Nunya-Maine
    Posts
    6,027

    Re: project derice-ing (pics)

    Quote Originally Posted by dodgeshadowchik View Post
    thanks for the input.

    the blue car is a 1992.

    You sure that's a '92? I thought the '90 and '91 cars had the silver gfx, and '92 and up were body coler? I could be wrong... but that's what I have seen at the junkyards many, many times.
    Quote Originally Posted by 22mopar
    have a look at my feedback on the forum. all positive.

    Steve

    '90 VNT competition package Shadow - T-III SC6262 conversion/restoration
    '91 Spirit R/T - white
    '91 Spirit R/T - white
    '92 IROC R/T - red
    '67 Barracuda 273 now, 440/727 awaits....

  18. #18
    Hybrid booster Turbo Mopar Contributor Darkapollo's Avatar
    Join Date
    Jan 2006
    Location
    New Cumberland, PA
    Posts
    920

    Re: project derice-ing (pics)

    who put the R/T badge on the shadow? never seen that one before :-p

  19. #19
    Garrett booster
    Join Date
    Apr 2006
    Location
    Vancouver B.C
    Posts
    226

    Re: project derice-ing (pics)

    Id take the drivetrain form the red car and thats it. I really like a sleeper look and the shadow's with the full GFX and fog lights look decent stock. You might want to try and find an 89 CSX grille and wing, they really ad a lot tot the shadows. If you really want to spend the money you cant go wrong with an 89 CSX-VNT bodykit, they are plain sexy.

  20. #20
    Moderator Turbo Mopar Staff dodgeshadowchik's Avatar
    Join Date
    Dec 2005
    Location
    Leaving on a Jet Plane
    Posts
    1,803

    Re: project derice-ing (pics)

    the build date on the car is 6/92. so it's either 92 or 93.

    shadow24: do you want a shadow style grille? i have 2 of them now. heh!
    the entire bodykit was actually off a mistubishi eclipse. (95-99) the front bumper is going in the trash tonight.

    a csx bodykit would look very nice! perhaps that's just what i'll do!

    as for the r/t badge... i have no idea. maybe it's one of a kind.

    "I'll give you anything you'll ever need and I'll find a way to turn you into a monster."

Page 1 of 4 1234 LastLast

Similar Threads

  1. R/T Project
    By Turbo224 in forum Project Log
    Replies: 176
    Last Post: 08-10-2012, 01:41 PM
  2. Fiberide "look-a-like" project. Pics included.
    By 1FastCSX289 in forum Interior & Exterior Restoration
    Replies: 145
    Last Post: 04-22-2008, 08:20 PM
  3. Project Progress Pic's....
    By turbojerk in forum Fabrication
    Replies: 8
    Last Post: 04-18-2007, 07:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •