I was installing a remote starter in the 92 daytona, I've installed several of these before, and now the running lights/gauge lights won't work! I found a wire at the headlight switch, that when grounded turns on the running lights. When I ground it the running lights turn on fine, but when I hit the running light switch on the dash the lights do not turn on. I can't figure it out. The relays are obviously good cause I can ground the wire and turn them on like that, but the switch won't turn them on. Headlights still work with the switch but when I hit the headlight switch the dash/running lights will still not turn on. I'm suspecting a problem with the headlight/running light switch. Anyone have a pinout diagram for this switch so I can test it with my multimeter to see if it's the problem?
Any other suggestions?