thanks guys . ill check it out this weekend. all so trying to find imfor on centering the motor
thanks
court
Type: Posts; User: csomni; Keyword(s):
thanks guys . ill check it out this weekend. all so trying to find imfor on centering the motor
thanks
court
have poping sound on the left front that i cant seem to find. replace about everything on the front. any body have any ideas what it might be. any input is welcome
thanks
court
can anybody recommend any wrecking yards i might try
thanks
court
need a lower steering shaft for a manual rack and pinion 84 0mni
rack side
9/16 x 13 splines 1/3 shaved flat 11 1/2 inches long
steering column seems to be all the same
thanks
court
is there a chance you can get me a 80 1.7 omni engine bay wiring diagram with the 5 pin icm. it would be alot of help
thanks
court
where is his web sight at?
no, you need to take the all the parts from the 1.7 dizzy and put them in the 83 2.2 housing. it tells you how in the carb section on the other sight. my modified dizzy seems to work ok on the 83 ecu...
need help on a 83 rampage i put a 1.7 dizzy in. i cant get the icm to fire . i can hook the same dizzy to my 83 ecu and it will fire. i tryed two different icm with no luck. the dizzy is out of a...
what part are the fender sheilds. if you cant find any i have a 86 setting here. they might be on it
anyone no how to adjust the power valve on one of these carbs
looking for the rightside fender loover. have one that is broke.
i cant seem to find a 82 rampage bulkhead pinout. i did find a 83 l body pinout. do you think they would be the same?
thanks
court
thanks guys . i think ill grab them if the price is right
court
found a 91 daytona with a 3.0 . has any one used the disc brake system on there l bodys. should i pull them before the car gets crushed
thanks
court
looking for a left rear tail light for my 84 omni. pm me price shipped to 98908
looking for a good spare mitsu turbo with a 2.5 outlet. something i don't have to rebuild.
thanks
court
do you still have # 13 52 mm tb. is it complete and do you have a pic.
if you run across a complete 52 mm . pm me, im looking for one to fit my 2.2
thats not good.
hi, im looking to buy a new 782 clearwater head. its a new Chinese head . i was wondering if anyone has bought a head from these guys and how did it work out
thanks for the input
court
i have one in black, if interested pm me
took the rad to the shop to get it rodded. its all plugged up. surprised it didn't get hotter than it did. bad news is they cant get the rod threw most of the tubes. time for a new core. looks like...
the fan is a stock fan from a 87 glhs. lower air dam ? ill have to check that. maybe i forgot to put it on. what gets me is the dash gauge only goes to the half way mark. and its not boiling over....
it is a stock 87 t2 set up, running a max of 14lbs of boost. the gauge on the dash only reads halfway and that is in between the # 1 and # 2 cly. my mechanical reads at the t- stat. its a fresh motor...
having problems with my omni at higher temps when pulling long hills. engine temp reaches 230 F . acts like its running out of gas. change the hep and she takes right off until it gets hot again. ...