I've seen a set where it didn't hug the head very close. Figure out how much distance you need to take off one leg, go to a hydraulic hose shop and they should be able to modify or just make you a...
Type: Posts; User: GLHNSLHT2; Keyword(s):
I've seen a set where it didn't hug the head very close. Figure out how much distance you need to take off one leg, go to a hydraulic hose shop and they should be able to modify or just make you a...
No they ditched the shocks on 90+
Get a passenger side motor mount for a 1990+ convertible. They stop so the engine rocking but don't transmit any vibration to the car. Best thing about 1990+mounts.
Todd he's gone through adjusting the throttle set screw trying to get the reading down and it's still reading high.
Take the tps off the throttle body but leave it plugged in. Does the voltage...
Believe it was a Dakota my 130amp alt came from in my glht. Had you swap pulleys but it was a direct bolt in. I didn't change the wiring and never had an issue
TurboDodgeparts.com has upgraded shifter linkages
You have to modify the buckets a bit, I also can't remember if you need the adapter plugs that rallylights.com sells but other than that they'll plug into the stock setup. Now the best way is to...
Sorry I haven't visited the forum for a couple days. The s body arms are braced underneath. I don't see them on the rock Auto pics but then they don't show the underside of the arm either. I have...
The spindles went designed for the l body strut. Some grinding might allow you to get more camber but camber plates might be necessary. They'd also help your roll center and camber curve as well.
...
How much camber do you have at each corner? Any additional caster? What are your toe settings? You can probably dial most of it out changing those. Is it a Shelby charger with the factory welded on...
I had to add 55% more fuel at idle when I added a ported head and tubular header to my car. Everywhere else swapped from about being 10-15% rich to 10-15% lean when looking at the adaptives. So about...
The ECU will adjust fueling +/- 25% you added 20% larger injectors, cut the fuel pressure by over half and then added mods that give you probably 15% more air flow. Turn the fuel pressure back up to...
Hope you're not replacing bulbs every two months with that much wattage. I remember running 100w bulbs in my Hella 550's 20 years ago and with the heat they produced they wouldn't last long. I put...
Beautiful!
Todd post the pic with the atp swing valve and your 4.5"radius pipe on it.
Is the 160w and 460w counting all the bulbs wattage together? If they're relayed then how is the lm and pm seeing any of it?
What's with the wattage increase? I use the factory headlight wiring to activate the relay. Use the stock bulb wattage and throw tions of light. I don't understand where you're getting those huge...
My vin isn't on these lists.
43csa1126mrc1c005
an aluminum flywheel and UDP will really increase the speed the the motor spins over when starting it. My 2.5 sounded like a machine gun.
what was the fix?
Well I didn't start with a complete bmf either. I designed a new 3 inch neck for it, had to modify and machine parts for the 76mm tb I'm using, machined down injector area so injectors sit further...
Anyone still interested in tanks? I work at Pyrotect fuel cells in oregon and can have these made. They probably won't be cheap, but cheaper than a fuel cell. I can ask if people want.
Life, kids. Wife, mines close to running but will still probably be a couple years after having to relocate for work.
the tune was done using MP tune v18.
I always over clutch the car just because I only want to do it as few times as I actually have to. Though I do like the aluminum flywheel and unsprung disc setup for driving better than stock anyway....