Search:

As in turbo LS in anything.

Turbo V8s are cheaper...

Nice ty.

I just put this style valve seals in my head.

https://uploads.tapatalk-cdn.com/20240325/aef419c6969dbfe0bc687baecc4aaf68.jpg

That's neat, could make that out of 1/4" plate and thread it. Very cool.

That would be perfect. But dang it's rich.

I drove myself nuts trying to do it with the head off with one of those stupid spring compreasors. The valves on these are so close together and there isn't enough room to swing the clamp around at...

I'd also be interested. Bought a supposed used Stage 3 LM from FWDperf. The chip was DOA.

(I de-soldered the stock chip from our stock T2 LM and it works fine in the FWDperf socketed LM.)

So...

Now that's great info! But in Canada they want $120/gal...


After an amazon search all the synchromesh/ synchro max valvoline, pen, royal p, GM. All seem to be in the same price range. I know...

Oh ya, hoping I can polish the little dings in the journals from the dingle ball hone. (never even thought to put a rubber cap on the end of it.)

If we get another 50k km out of this engine I'm...

So... I was still really curious about my findings... Remembered I have a different caliper newer/ potentially better.

I also have a set of telescoping bore gauges.

I double checked the crank...

Markings on the...

So trying to order new bearings for this motor I am putting back together for my kid. Just going to give it a quick 600 grit polish.

Connecting rod Journals measure 1.963".

All data I'm seeing...

Isn't that for nv4500 with carbon fibre synchro?

87 dodge daytona.

So I tried fixing this thing to no avail. Cheap 37 year old plastic don't last over the years.

What has anyone done to just make it a manual door?

This is the main blend...

Is this in the trans? I put 5w30 Mobil high mileage in ours but was told that's likely not a good idea and should have went mobil 1000 but you can't get that stuff here in Canada.

Normal stock.

They just gave me a full refund and told me to keep the parts for the window motor rebuild kits they have listed for the 87 dodge daytona. Was $45 bucks back. They did the same for the Moog...

Ah okay, see that. However as long as the coolant is flowing I doubt it's an issue.

Big line from thermostat housing goes to back side of turbo. (firewall...

Those are right.

My lines From TU although snug in length fit 100%. Wheres the photos.?

I'd be interested. As long as you don't have to run a different downpipe.

I go the last turbobonetics 2.5" brand new that Cindy had at FWDP. It would be nice to see another batch available on...

Dm sent.

After a clutch replacement would you normally have to reset the stock plastic one?

This looks like a very nice set up.

I only use the RTV between cork and valve cover. The 4 corners to the rubber a couple dabs to hold the rubbers into the cover.

This way you can remove the valve cover without having to redo the...