I take it that this will never happen?
Type: Posts; User: 94GTC; Keyword(s):
I take it that this will never happen?
I have one. $300. moorepowercoating@gmail.com. Email your phone and I will text you photos to show mileage and condition. Money order only
So who bought him out? I thought he "Shelgame" had a few ecu's out that he had worked on, and had some better tunes. Since the first thread I saw was over 7 years old, I am guessing, nothing for N/A...
Is anyone still altering the ecu on the Mitsubishi 3.0 ? I contacted Boostbutton and got no replies. Just looking for a little more performance than the factory ecu.
When I bought my 03 new, I was told that 50h.p. upgrade is about all the trans could handle, for a while. A friend of my put a converter, and a valve body in his 07 and pulls a 36' 5th wheel car...
I won't argue that, but alot of the early problems were caused by electronics. I would have rather had an automatic than my 6-speed in my 03, but I could not justify$4K on top of the price of a new...
The Allison is a perfect match with gear ratios and really wakes up a 6BT. I have only driven non-modified trucks with the 6BT/Allison 1000, so I can't talk about holding up to power. Most of the...
On "the other" Mopar turbo forum, there was a discussion as to what was the definition of rice. After all was hashed out, by definition, I mentioned a couple of classic Mopars that fit the bill,...
I actually kind of like it. It would make you look twice, that's for sure!
I am not a fan of the Shadow front end. Do the body lines match or no? I have a 91RT that the roof is a little rough on, but the drivetrain and interior is in good shape. I have my eyes on a zero...
I take it that it bolts on but does not really match the contour of the doors?
Forgive me for asking, but for some reason I "think" I read that the front clip from a Spirit will bolt on a Shadow. I know it is probably not true, but I have to ask, will it bolt on? Fire away!
FASS platinum is closer to $600. The Walbro pump is under $100, and for less than $150 I put together the rest of the system. You can run common, Cat and Cummins filters or replacements that can be...
The only reason that an Airdog would gel up and a Fass did not would be if the Fass has a fuel heater. If they have the same micron filters, and the same fuel, The fuel does not care what brand the...
My Scamp never came close to those mpg numbers. It had the DC computer on it, and at best it was 32-33 hwy. I could pick up a back corner of the truck, so yea they are lite!
Are you up to one more of each?
I went to Diesel and FI school and 20+ years working on them, and leaniong out a Diesel was/is never used. In a gas engine you can lean the combustible mixture, in a Diesel with no intended...
Instead of trying to "lean" it out, wrong term for a diesel, you need to look at the turbo and intake side, because you need more air. Too much smoke means to little air.
360 heads are 5cc larger. The added flow far outweighs the drop in CR. I had a set on a 318 with a cam a little larger than a 340 cam and it was a HUGE improvement. How many guys saying the 360 heads...
Check your afc diaphragm and make sure it does not have a hole in it.
Mine never ran hot with the 16cm housing, but I never went that high of psi with it either. An He 341 would be ideal for what he is doing. It would spool quickly, and hve more than enough air for a...
Pretty shure I have a 12cm housing, "new" collecting dust. My 92 had a 21cm housing stock, and I put on a non wastegated 16cm housing, screwed in the afc and turned the psi up a little and it made a...
The wrap holds in too much heat and will burn the carbon out of mild steel, causing it to look like dried mud and cracking.
Got it today!
I would sure like the two pillar pods that have been deleted that I paid for over a month ago.