Search:

Updated:

The common block and crank has a sale pending on 2/23.

The exhaust and 3 bar map sensor have sold.

Thanks!

It's an MSD.

Date: 29th January 2013
Username: moparmaster
Full Name: Dave
City, State, Zip: Lewisville, TX. 75067.
Contact: davidescher@hotmail.com.

I have long since gotten out of the TD stuff but need...

Will the $99 rick Diogio design DP work on a stock TIII? I need a new DP for the car since the previous owner used a cutting torch on the stock pipe and it's rusted pretty bad. $99 seems like a...

I would do an $80 regrind if they were the same specs as the stg 1 cams. Does anybody know the specs and how do you check to see if your cams are good?

I want a biodiesel kit but I don't want to shell out $1500 for a good one!

I guess now I know why my TDI Beetle is getting worse mileage!! I used to go 550 miles/tank and now it's like 485 miles/tank. I did not think it could make that much difference but I have not made...

I actually have two tires mounted. They are a cheap LeMans brand in the stock size and have a slow leak. The two that didn't were donated to a friend.

I'm located near Dallas, TX. I'll have to get a shipping quote tomorrow D1a8J. I'm not going to SDAC but, I am willing to ship!

Great condition. Off of my '93 R/T. Have since put on 18's. $150 w/ centers/lug nuts. Prefer not to ship but will at buyers expense.

Fully rebuilt DOHC Neon head, excellent shape. 5 angle valve job, new guides, seals, decked, etc. Comes with everything needed to run including valve cover, gasket, and brand new MLS headgasket. ...

I bought a transpro cheapie ($87) for a '91 2.2 Spirit. It is necessary since my Iroc R/T is next to impossible to get a radiator for. I had to hack the center section of the R/T fan out and make a...

I have heard that Rick's rads are around $850 since there are so few left. Let us know!

Dallas, TX. pics coming to Umbass shortly.

I have a built hybrid motor for sale. I cancelled my hybrid plans and sold everything but the long block. It has cast pistons but is completely assembled with all new bearings, pistons, etc. The...

I would use 500 grit wet paper and a very slight hand when sanding between color coats. You don't want to create any high/low spots or cut through the color. It does a wonderful job on the finished...

What do they replace in a recore? Does it replace the brass mating pieces that connect to the plastic end tanks? My spare TIII rad is cracked on the junction between the core and the end tanks. ...

I'm in the same boat and with my Iroc R/t and was thinking of using the TI radiator with a Cummins IC front mounted. Why not simply move the IC to the front? At least the TI radiator looks like it...

I always sanded the jambs and sills if they were primered. Use 360 grit wet paper and dust spray some flat black primer or paint onto the lighter colored primer you used. When you sand that off,...

Saawweeet! I will be down there this summer if I'm lucky. I need to get some performance cams, adj. cam gears, and a Holset before I make the trip. I figure it would be best for me to get dyno...

Can FWD make custom cals on the dyno yet? I know TU can but I can't make the long drive from Dallas, TX so I'm hopeful they will be able to tune my T3 eventually. THNX.

Trimcals allow for different boost settings, fuel curve and timing curve adjustments. Just sold mine (TII) and will be buying one of the FWD '92+ (TIII) Trimcals when they come out.
Current cals...

My Ninja's are facing forward like the points of a Chinese star would be, going into something. I thought that was factory but at least make sure they are facing the same way on both sides.

I won't go that route! I know others have done the Holset and was wondering if other manufacturers had something that would work too.

Will a FWD staged cal support this big of a turbo? It is calibrated for a stocker but I was hoping it would handle the same boost level (18-20psi).
BTW, I had a 50 Trim stg III but had to sell it...