Thanks for posting this! It was a fun read.
Type: Posts; User: Spraynlog; Keyword(s):
Thanks for posting this! It was a fun read.
Are the rear hatches the same on the 2 door and 4 door?
My '90 Sundance 2.5 Turbo has the A523 with 3.50 gear.
To be clear, I replaced the 1st-2nd cable that attaches on the passenger side of the shifter. I was out to the drags last night and it worked fine. Track was cold, not good traction the car went...
I pulled a shift cable from a 2nd generation Neon just to compare with what I had. It turned out to be a match! I installed it and it works great. $21 fix for my problem. :)
I saw a cable with the right part# on MoparPartsGiant, and ordered it. When the cable got here I installed it, but later I saw it wasn't the Part# I asked for. Next, I went to their website and...
I'm in need of replacement shift cables. I have searched wrecking yards, found the P/N to be discontinued on a bunch of online Mopar parts houses. Looking for a '90-94 P body in the yards seems...
The electric car idea would work. I've seen Teslas running in the 11's at 115mph. A P90d with ludicrous mode should do it. :)
WooHoo! Nice job Angelo.:clap:
Liked!
Awesome job on the van! Way to represent!
I'll take the 3 way PCV grommet if you still have it.
Thanks for the tip about the slick pressure, I'll lower them a bit more next time. Boost level was 17-18 lbs, tapering off in 3rd and 4th to 15-16. My best 60' times were 2.0x, worst was 2.29. I...
Very good collection of ideas by Vigo! I finally got the Sundance running and took it to the track tonight. It now has a fresh .030 over balanced 2.5 with the shafts removed, the trans is a A523...
The content of a lot of motor oils can be found here;http://www.pqiamerica.com/
I looked at the Ed Peter's tranny video, and noticed he stressed that 1500 ppm of zinc in the oil really helps. His info was from 2011, so I looked up some more current tests of oil on PQIA.com, and...
I found this through a friend who is a Neon guy. The trans it talks about are later model than the TM stuff, but I found it interesting, especially the lube info. ...
Yeah, the stock 2 1/4" downpipe with the factory converter kind of plugs it up. I'm thinking I've still got a 195^ thermostat in there too. A couple of minor changes should get me a 15 flat.....I...
Weather permitting, they usually run every Friday and Saturday night, from 6pm until midnight. I was out there on March 6th, and I've run as late as Halloween night.
Yeah, the track has a dual arm tree, three light .500 blink down to green. It was a slow night, not a lot of cars, so we made quite a few passes, I did 8 in the NYer. A mixture of cars, from a...
Back on March 6th, I took the daily flog NYer to the track just to get a baseline run. I ran on my snow tires with 10lbs boost, just to see what it would do driving just like I did all winter. It...
Since I have a Sundance and a New Yorker, I did some measuring. Hood width on the NYer is 55", On the Sundance, 53". The distance between the engine mounting rails looks to be 39" on both of them,...
Hey! It was good to meet you and see your van out at PIR. I'll try to get it going soon, my last garage session I did a compression test on the engine in the car, and I was happy to see it looked...
It has been a busy month! Terry delivered the Sundance and the rebuilt 2.5 shortblock on 3/18. What a great guy! The car was filthy from sitting outside for 5 years, and in Oregon, it was covered...
Haha, with the weather you are having, you won't be aquaplaning in the near term.:p