You can setup MS to "trigger" on either the slots on the pickup wheel or the filled in parts of the trigger wheel. The trigger angle will be the beginning of the opening or gap and the trigger...
Type: Posts; User: 87turbodance; Keyword(s):
You can setup MS to "trigger" on either the slots on the pickup wheel or the filled in parts of the trigger wheel. The trigger angle will be the beginning of the opening or gap and the trigger...
Well, you could easily convert the distributor pickup to the half moon style mentioned above. Then add some manor of crank position sensor. A 36 tooth wheel is overkill for ms2 but can be bought...
You can block off all the openings in the high res section of the shutter wheel and then use a sharp knife to cut out one section in the spot you want the cam pulse to be. You could also do the same...
Unfortunately, it's been a couple years so I can't remember. You'll have to get out the degree wheel, mark the spark tower positions on the distributor and mess around with MS and your distributor...
I've tried all the settings and distributor positions I could never get what I wanted. I even tried to reclock the rotor to achieve a better rotor to sensor alignment. Finally I said ---- it and...
If you want to make power and go auto the A604 is your only option but have a deep wallet and lots of patience. If you're on any kind of budget the A543 5 speed is the only option I am aware of that...
Megasquirt 1 and 2 use calculated periods of time to guestimate spark advance. Megasquirt bases all advance off of a reference point which is your trigger angle. Megasquirt will then calculate how...
That would be the A670 3 speed auto that came stock on some 3.0 cars and vans. It's basically an upgraded A413 but don't expect it to handle too much torque before it self destructs.
Megasquirt 1 and 2 use calculated periods of time to guestimate spark advance. Megasquirt bases all advance off of a reference point which is your trigger angle. Megasquirt will then calculate how...
With the stock dist you can never achieve the ideal trigger angle without moving the dist out of sync with the coil towers. crank trigger solved this for me. symptoms are breakup at high advance...
I was never able to get a trigger angle early enough with the stock distributor to get my desired max of 45 total timing. That's the main reason I dumped the distributor and went wasted spark with a...
http://i.ebayimg.com/00/s/NDgwWDY0MA==/$(KGrHqF,!o8F!YCD3ssIBQQT+bh(fw~~48_20.JPG
http://london.kijiji.ca/c-ViewAdLargeImage?AdId=407151589
How's the motor coming?
No reason why the 24V CAS wouldn't work. The three vanes on the crank looks the same to MS as 6 vanes on the cam like the 12V. Just a matter of software changes. The crank is likely optical but...
I'm interested in see the results of this. I must say, Ed, I didn't see you going this route.
Ar you going to use the stock three vane crankshaft sensor in the 3.5 with MS? The stock crank and...
I ended up putting some extra o-rings around the bottom of my GM pencil injectors to prevent them from going too far into the lower intake. Worked well with no leaks and the rail held the injectors...
This MS will also work with the hall-effect sensor in a 2.2/2.5 TBI distributor. One of the peak & hold board that I have for sale can be used with this MS to drive stock turbo low-z injectors.
My car is scrapped. MS is for sale. see buy and sell section.
It comes with the serial cable but I didn't mention it because it's easy to source.
---------- Post added at 08:15 PM ---------- Previous post was at 08:10 PM ----------
A completed MS1 unit...
no. i don't have a wideband, unfortunately. I never did.
http://www.turbo-mopar.com/forums/showthread.php?66388-Megasquirt-with-wire-harness.
Date: 07th June 2012
Username: 87turbodance
Full Name: Ryan Loos
City, State, Zip: London, Ontario, Canada
Contact: ryanloos54 at gmail.com
Price: $300obo
Description: Megasquirt 1 Extra with...
Car is gone. The wrecker said they will keep it in the yard for a few weeks before crushing it. Has partially rebuilt 3.0 with conical valve spring and light weight retainers, crank sensor 18-1...
I am saving the MS and the audio components and everything else goes. I'm driving it to the wreckers and saying goodbye. It will be at Corey Auto Wreckers in London, Ontario, Canada until they...
:( Car will be scrapped tomorrow....