I was able to read the first tune and save it on my computer but I can't do anything with it because it saved it as a bin file. From what I've read you can't read the bin file unless you have the...
Type: Posts; User: moparmike70; Keyword(s):
I was able to read the first tune and save it on my computer but I can't do anything with it because it saved it as a bin file. From what I've read you can't read the bin file unless you have the...
89 Daytona 2.5l
Ok, I will set up the AF sensor with the gauge first because I think my set up doesn’t have the conversion to run it in place of the O2. I have an Autometer gauge set up and the AF runs straight to...
When I put the wideband in I have to set the tune up for that correct? I’m assuming you want it set up so the ecu reads the wideband and not just hooked to a gauge.
I am willing to learn to do the calibration myself, I have been reading everything I can find on it and I have downloaded the appropriate programs to do so. Rob from BB did the tune that is in there...
I am using a Snap on scanner. It has +40 injectors and the map reading itself I don’t think is the issue as it’s computing the value correctly (absolute+/-boost or vacuum). It’s just that the...
Not sure if this is the right section to post in but I think the problem lies in the tune. Needing some help with my newly installed engine. The vehicle is an 89 Daytona 2.5L with a 50 trim t3/4....
Received mine the other day, thank you!
I'm going opt out, sorry.
The seat would have to be removed for sure and replaced. As far going to a larger seat od I'm not sure if they would have to do that or not.
I would definitely bring it back to the machine shop. You risk dropping a seat if you don't confirm it. Dropping a seat equals instant carnage. Personally I wouldn't run the head myself with it like...
Looks like it came out pretty good
The best way would be to drill out all the spot welds around whole quarter panel. It's less work, less filler and a cleaner installation to replace the whole quarter and if done correctly will last...
#14. Moparmike70-stage 2
I will buy one.
1) chargerturbo87 -1- With timing window & With hardware
2) moparmike70- 1-with timing window & with harware
3)
4)
5)
6)
7)
8)
Fyi, if you do by some chance get paint on any surface there shouldn't be just put some paint thinner on a rag and wipe it off just like that. Never use any abrasives. Keep the engine as clean as...
Anywhere there is a gasket and any part considered the "inside" of the engine should be clean and free from any paint. All freeze plugs should be installed before any painting and they can be painted...
Is the steering shaft any good? Looking for one that's not binding. Price and shipping to 02766
I would paint it right away before assembly because you'll be handling oily engine parts at that point. Right when you get it from the machine shop will be the cleanest it will ever be.
Deposit paid, stage 2
I will be needing a stage 2 or 3 but not sure which one I need yet
Put me down for one.
1. johnniroc (w/ port holes) (TM)
2. 86seeS (w/ port holes) (TM)
3. DOHCRT (TM)
4. moparmike70 (w/portholes) (TM)
5.
6.
7.
8.
9.
10.
Payment sent