Search:

hey, very interested in doin the swap to my daytona over summer break what would the shipping be to NC 28023 ??

What is the best place to tap power for the computer when installing the fuel injection computer. I read it is not good to tap the computer leads for the 5 volt can cause problems running. This was a...

Have all four doors and a good blue hatch with defrost

I would like a glass L body hood with the dodge rumble bee truck scoop

Lemon pledge furniture polish is a good cleaner I use it on my plane windshield

Only use mild cleaner and lots of water with a SOFT COTTON cloth NO PAPER TOWELS!!!

Hairy Glass, Inc has a few parts also

The man at the drive shaft shop here has built these axles for a while and says that they are only about 80 per efficient for power transfer where as the unequal length is apporx 90 percent...

What is the checkout for one? We have power and vaccumn:confused2:

I like the 89 and later mini van front brakes and lower control arms (they are reinforced) bolt on to daytona sturts 1/2" spacer under the top nut. Then use the 16 inch daytona style rear disk solid...

Are you able to drill the three extra holes for the water cooling inbetween the cylinders like the 782 heads? Should not be to hard to do! I have a couple of these heads and really like them. Does...

I built a A frame with a hub mounted a 1750 rpm motor installed a belt around the wheel 3" motor pulley presto spinning stand

If you go to Ross Engineering they have the plenum material 1/4" thick in a semi round or D shape then the holes can be cut into it and the mount bolts holes threaded the southwest dodge club has a...

I have a black ghl body shell if you need parts I can cut above the spot welds and ship if you pay shipping plus time to cut can send pictures this weekend

The correct placement is approximately 6 inches from the exhaust valve. People worry about the probe melting and falling into the turbo thats why they just put it where ever. Never had one to fail in...