Please put me down for two (always good to have a spare) assembled units and two 7" screens, looks awesome !
Type: Posts; User: vprtech; Keyword(s):
Please put me down for two (always good to have a spare) assembled units and two 7" screens, looks awesome !
As far as I know, yes.
Looking at the FED vs Leaded calibrations, I was searching for a flag or temperature threshold to disable closed loop, however I did not find any. It appears all they did the the Leaded/Gulf...
It is a Gulf calibration, leaded fuel, so it should run in open loop.
Please post the part numbers for your Ecus.
Something that might be of some interest, the table type "Fixed X 9 Byte" I have not seen in any of the Magnum V8/V6/Viper cals, however they do appear to be the same table type and shape as what you...
I'm amazed that not more people are interested in this. There has never before been a way to log as fast, or log stand-alone, it's like having a miniature engineering box. Even though I don't do much...
Curious, is this with the DRB 62500 coms, or the serial mod 9600 ? With the car I worked on recently, I was unable to get the serial mod to work well at 9600 baud, this was with a 9 pin serial...
Ok, besides me being a little challenged with the hex math, I think I understand how to calculate the 8 bit tables. I am however, not clear about how the last slope value for the sixteen bit tables...
Correct me if I'm wrong, but what you are saying only applies to the 16 bit bit fuel tables, correct ? The regular tables I have looked at don't have a slope value in the bin file for the last...
To revisit this, regarding calculating the slope of each break point, would this formula for rise over run be correct ? Is there anything I should keep in mind, and would this apply to the 16 bit...
It appears that these ecu's are capable sending data quite a bit faster than previously thought. There may be a limit to how many times the ecu will update a ram location in a given time, but that is...
Rob, any chance you have, or can make a flow chart for AIS control / decel MAP ? I have found your flow charts to be very useful, thank you for sharing them.
- Chris
Brian, I'm going to have to disagree with you regarding the USB speed. USB may be faster than our SCI, but does not handle the byte by byte send>receive>send>receive data format with tight intervals...
Ok, seeing that the SCI to pc connection still seems to be an issue, I was wondering, is it possible, or practical to use the ethernet (RJ45) connection for SCI on our ecu's ? I know Risen has had...
Oh, great work , I can't wait to try this out. Do you think this is worth trying with a Ostrich 1.0, or do you have reason to believe it won't work?
Excellent, I'm curios, did you setup MP Tuner setup to update the Ostrich every time a calibration change is made, automatically, or do you have to flash the file manually ?
- Chris
Cool, I'm curious though, when you say log with the Ostrich I suppose you are not talking about the RAM ? In other words, when you say logging, I'm thinking you mean watching to see what ROM...
I completely agree, incorporating the logging into MP Tuner would be very useful. Specifically, it would be great to be able to link a live cursor via the X axis, on the functions, for example. On a...
Wowzer, I just started looking at your software, I was wondering, have you considered adding emulator support, or if not, a auto-save option so that it could be used with Emutility ? Also, I'm...
I did communicate with Mark recently, and he said he was planning on adding support for the Chrysler function format, problem is, he also indicated that it would probably not be completed in the...
I don't know if this helps any with the earlier SMEC and SBEC I stuff, but from what I've seen, even the slowest of the slow scan tools put SBEC II and later JTEC / SBEC III ecu's into mode 12 when...
This is very helpful, I will forward this to Mark.
There are a few reasons why I want to use TunerPro as opposed to CHEM or DCAL , some of these reasons are because I'm trying to tune SBEC 2 ecus...
Great Risen, I believe that info would be very helpful. I'm fairly certain that Tuner Pro will be limited in that there will be no table scanning, like in DCAL, the definitions will have to be...
Since it's looks like we are getting a little closer to having support for SBECII calibrations, I thought I might bang on some doors to find someone, who already has a decent bin editing software, to...