I did not use a resistor block. MSD says with a reading of >1.0v one is not needed. IDK if the stock coil has one internally but either coil I use has the same end result. I had a Blaster 2 on my...
Type: Posts; User: mario03SRT; Keyword(s):
I did not use a resistor block. MSD says with a reading of >1.0v one is not needed. IDK if the stock coil has one internally but either coil I use has the same end result. I had a Blaster 2 on my...
All of the pulleys and belts are fine.
Rob,
Yes it has been on the road for a few years. Also the HEP connections are reversed and it is offset a few degrees to the right of the mounting screw. The rotor is also offset on the Dizzy...
The Mini came with NGK Iridiums. Replaced them with NGK V Grooves. I will go out and look at the Dizzy , I did hold the shutter and tug it before and it "seemed" secure but I will look closer.
All,
I'm working on a 89 Mini with a SRT-4 engine using a Dizzy and a STG 5 HYbrid SMEC from FWD Performance.
The Van came in with a major missfire on all 4 cyls after part throttle when going...
Thanks for the call. Send me some info, email was sent. Video would be cool. Very Interested!
James Reeves - Reeves Racing
86 GLH-T 10.44 at 140 mph - Iceman CAI and catback
U Fonny!
Musta got those from the NOPI catalog to get 550hp!
A stock SRT-4 turbofold will bolt right on. Run 6-7 psi on stock rods!
FYI,
Marion
Price Drop: 2300.00 obo.
36001
36002
36003
Date: 06th December 2011
Username: mario03SRT
Full Name:Marion Hutzel
City, State, Zip: Cincinnati, Ohio
Bimmer FTMFW! :eyebrows:
For my current DOHC R/T I picked up a 55mm billet Modern Performance TB used for 60.00, added a 3.0 intake elbow and a K/N, and a MP ECU, Headman header, Catless 2.5 " exhaust, and 3.94 GB. 35 mpg...
Crazydead,
I will have to look into that. Let's see how this goes, I prefer pickup or meet up .
Marion
Ok Mon! We can work something out.
Marion
All,
This is a driveable parts car. I will add some pics.
I have a White 1989 Daytona TTop car for sale. It is a 2.2l w/ Mitsu Turbo & A413 T1 SMEC. It has a T-II intake hooked to a T-II IC...
Hey!
Check for the vacuum lines being virgin.
Also check the map sensor harness and the pcm harness for evidence of being tapped into.
Look at the cyl head to see if the head was swapped...
Blue Oval FTL!
That be the butt Bob!
Interested?
JBA shorty headers (same as the stock SRT-8 mani's), Borla Catback, CAI, Diablo Predator tune. 363 rwhp. 6 Speed TracPac.
Two Tons of Fun :eyebrows:
If anyone is interested in a good...
If you bring your SRT-8 the # to beat is 13.4 @ 106. Thats what I ran 2 weeks ago in my R/T.:nod:
Marion
All,
I have a White 1989 Daytona TTop car for sale. It is a 2.2l w/ Mitsu Turbo & A413 T1 SMEC. It has a T-II intake hooked to a T-II IC and radiator, and T1bov. Exhaust is 2.25 catless side...
Rob,
You are welcome.:D
I was cutting some good lights and just happened to cut this one a bit to close -.004. That ended my Saturday. I spent the day trying to launch the 3925 lb beast....
Lay off the cooter tonight and you will be good to go. :D
Got some Hard Cider and some Honey/Wild Turkey sipping chit:nod:
Me and Pa Reeves will have a battle of the Hemi's! Before the booze of course.....................:eyebrows:
Alrighty Then! :D