I did mine today. I never have opened them and this is the 3rd set I've done. I just tuck into the slit.
Type: Posts; User: rare_ram; Keyword(s):
I did mine today. I never have opened them and this is the 3rd set I've done. I just tuck into the slit.
I don't think they will come apart. I've recovered a few and I just tuck the fabric in the crack using a scraper.
PM replied to.
Got a set near Richmond VA.
Looks like what would go with the cubby part if you don't have the armrest console
As stated, shipped $ to 23834.
Why do you think you need hubs?
I have a nice L-body switch just has an ear broken off. Very good chrome on the switch handles.
There's one on ebay. Silver with grey leather.
The E coil isn't round like an old school coil, it looks more modern and it's located very close to the distributor on a bracket that I believe bolts to the valve cover. I had a 93 Shadow that had...
Ok, so the MSD is a waste of $. Any advise on Accel? I have a couple of brand new ones and I could paint one red to look like an MSD. Or just ebay them?
So I guess we need one that has a resistor. What about Accel. I have 2 of them, any problems with them?
The one in there works, just looking ugly so I was gonna buy another MSD to clean it up and match the red wires. Then I read that we should stick with a stock type, so I'm just wondering what I...
I read somewhere that we should not use the MSD coils but only a stock coil. My Daytona has all MSD ignition parts except a nasty looking stock coil, but there was an MSD in a box. I also have a...
I came to this post to ask about this exact thing. Don't want to loose the function, just wanna make it less annoying. Where are they located on other models since I'm probably going to find in the...
Took me 25 years to find mine.
Need a rear washer nozzle that will fit an 87 Aries Wagon.
I took two of the doors to make one working one.
Do you mean the outside window scrapers?
Yes. Waiting.
I'm trying to pull the inner panels and found 4 screws under the pad, but the pad seems to be held on by the chrome trim on top. Do I just use a angle screwdriver or is there a way to remove the pad?...
Took 1st prize in FWD with the Daytona.
Hope to see anyone near Central VA this Saturday 9-19 at Virginia Motorsports Park for the Mega Mopar show.
Not so much a fail as a looseness. I just put a small self tapping screw in from the back and that tightens them up.
They had one less than a month ago at the local pick-n-pull.