These units will be $200. off of final price not to exceed $1500. (plus shipping)
1)Nathan Rotz 1985shlbychrger
2)Chris - Old Man Jones
3)Will Johanson -- Bandit 600
4)Austin Dunlap--...
Type: Posts; User: itoktoeatfish; Keyword(s):
These units will be $200. off of final price not to exceed $1500. (plus shipping)
1)Nathan Rotz 1985shlbychrger
2)Chris - Old Man Jones
3)Will Johanson -- Bandit 600
4)Austin Dunlap--...
Yeah I just don't understand why the cel would come on. There are no codes stored like if something else is causing it.
Here's a video of the cel coming on.
https://youtu.be/KAghwTrzxj8
And...
Here's a video of a quick pull. It wouldn't let me go over 10 psi and the cel flashed once in second gear. https://youtu.be/PULG2bBj8XA
Interesting. But no, it's a one piece.
I will do that! Added to my gauges.
I'm running an unmodified Turbonator stage IV cal in a 87 T2 LM and seems to run fine for the most part but the CEL comes on at basically anything over 10 psi. Base timing is 12 degrees, I only run...
It is quite small and text is difficult. I just started using it but plan on playing with the resolution and there is always the widows magnifier app. With a stylus or a mouse things would be easier....
http://www.ebay.com/itm/WinBook-TW700-16GB-Wi-Fi-Black/263130642855?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Bought this little guy to keep in my car for mpscan and mptune and...
I planned on doing it like that. The cpu contacts are probably too small for my skill level haha.
I bought this cable and its working just fine with an adaptor I made but I really don't like all the extra cable routing. Does anyone see any problems with soldering right to the contacts on a logic...
Thanks for the replys!
I should rephrase my question. Would a bad VSS cause a steady extreme lean condition, over 18:1 AFR, at idle?
Yes. It's an 87 LM. AFR was one of the gauge options. I...
I got a SCI cable and MPscan setup and everything working (I think) but hadn't done any data logging until a couple days later when my car (87 Shelby Lancer) started idling extremely lean and miss...
Sorry for bumping but is swapping the Tx and Rx wires required if the settings are changed in the cable as per the boost-button ftdi setup page?
...
Thanks for the replys everyone!
Most of those things I had already checked but some I hadn't thought of.
I thought I would try priming the pump again. This time I used an old distributor...
I could try it. Couldn't hurt at this point.
The only other thing I've thought about is possibly a main bearing got spun and blocked an oil passage. I don't know the "mapping" of the oil passages...
Well its a brand new pump that I primed by hand and is flowing oil to the filter.
I wish it was as simple as bad gauges but there is no oil in the turbo feed line or oil to the head.
I'm trying to take my Shelby Lancer to SDAC 27. Of course the engine developed a knock at the end of April. I didn't have time or money to rebuild it before SDAC comes around so I pulled it out and...
Thanks for the replies. According to turbovanman, cylinders 2 and 3 need swapped. If I leave them in the correct reverse order it won't run at all.
Back to work on my hybrid. I'm using a Rich Bryant modified distributor and mounting plate. I've 180'd the HEP, swapped HEP connectors, and swapped cylinders 2 and 3. It runs but cylinders 1 and 4...
Thanks for the reply! I ended up emailing Rich Bryant and got the same info from him.
There is a 4th option. I made extensions/adapters from an old wiring harness and bad HEP. Plug n play and...
I know this is a really old post and little off topic but I am looking for information about what modifications need to be done to the HEP wiring to run the head mounted dizzy.
Alittle old I know, but thanks for keeping this thread updated!
I know this will never happen if you cant even find 5 people to buy daytona, but I would kill for a H body hood.
I dont know how pa is but I registered a 1500 ram as a car to be cheaper just couldnt be cought hauling heavy stuff.
My buddy bought a 80s ranger for like $50, we put a head gasket on it and very few odds and ends but hes been driving it for over 5 years now. Im not ford fan but im impressed with that. Now hes...