Search:

Mexican Lebaron (AA body) 2.5 TII.

http://s8.postimg.org/lm4lq9qkl/image.jpg

I found out why the o2 sensor (and also my wideband monitor) was reporting a constant lean condition at idle only. About a year ago I advanced the cam timing to 4 degrees with the Fidanza sprocket...

My Lebaron runs fine, however I was looking at my DRBII and the O2 voltage at idle is at .08v almost all the time. I installed a new O2 sensor and its acting the same. What could cause this?

Thanks

I've been reading on this forum that Magnaflows don't last long. http://www.turbo-mopar.com/forums/showthread.php?67014-Trying-to-pass-CA-smog/page6

Wouldn't a Walker cat be better?

Since I bought my SRT4 it came without one. Smog tests are getting tougher around here. My car has stage 3 and Mopar Performance exhaust (with cat-delete pipe). Wich cat would you recommend? Thanks.

http://www.youtube.com/watch?v=4llm0-JD5ZA

Stock pulley = 1.55kg (3.41lb)
UDP = 400g (0.88lb)

The UDP weight almost 4 times less.

Anybody knows the weight of the stock non-a/c pulley?

That's what this CSRT4 has, 3" all the way.

The CSRT4 now has a MP swaybar setup and handles great.

Two more videos, the first one against an Audi TT (2.0 Turbo):

Both videos are available...

1995 --- Lebaron (AA body) --- 2.5 TII (mex) --- A413 (3.02:1) --- M&H 23x7.5 slicks --- Mario Viveros --- Mario_V --- Mexico --- 60'ft (1.822) --- no 1/8 ET --- 1/4 ET (14.390) @ MPH (90.40).

This video is of another mexican CSRT .

Everyone on the track thought that this special edition turboed 5 cylinder 305hp Focus would have it easy against the Caliber but just watch what happens...

I really don't know but what I've seen from the stands is that the CSRT4 roasts the front tires very easy if you accelerate early on the exit of a curve, I think my friend shifts to 3th early to...

Hello...It is been a while since my last post.

I want to share with you a video of a friend's Caliber SRT4 running some laps against a 2010 Camaro on a track day.

Hope you can check the new...

http://i48.photobucket.com/albums/f245/mexibu/04062009830.jpg

It is from a mexican turbo Mustang :).

The instructions from FWD for the F-1 cam read: "no shims required", I know that is with stock lifters.

With the PT lifters I assume the same 2 recommended shims to obtain the .126" height are...

A friend wants to install the pt lifters with the f1 cam.

I read that shimed pt lifters are not supposed to be used on regrind f2 and f3 cams but what about the f1 cam?

Thanks

It's not at TDC, just went out and took the pic hoping the marks were visible :).

Thanks all for your answers.

I also thought that position was 2° retarded but now reading some posts on this forum on the subject I´m not so sure.

http://turbosmx.com/fotosforo/camsprocket.jpg

My mechanic says the cam in my 2.5 is 2 degrees advanced, is he correct?

I always thought it was the other way.

Thanks

A friend found this video:


http://www.youtube.com/watch?v=ux1J_O0ZnIU

More pics just posted by my friend Armand on http://turbosmx.com:

http://img160.imageshack.us/img160/7793/formulak.png

http://img17.imageshack.us/img17/9227/formulak1.png
...

I don't know much, just little bits I´ve read. I know their 2.2s had a bigger cam (apparently from Isky), Weber 40 with free use of jets, 12:1 compression and header.

The pics aren't mine but...

I just found this pictures on a mexican forum.

On the late 80s there was a Formula K championship in Mexico city. All the cars used a 2.2 engine. Check them out:
...

It seems to be a canister related problem. My mechanic said that when the canister doesn't work well it can make the car run very rich. His own turbo Shadow failed in a similar way. I didn't know the...

It seems the pcm is trying to compensate for something. Like when you disconnect an injector or a vacuum source and the pcm floods things up and in consecuense the O2 sensor stays on rich, but this...

My 2.5 T2 Lebaron runs fine almost all of the time but since about 6 months, very rarely it runs super rich, and some times it stalls. It doesn´t matter if it is at idle or cruising, it has done it...

I found some cluster pics. I took this pics when I bought it.

http://turbosmx.com/fotosforo/tableroleb1.jpg
http://turbosmx.com/fotosforo/tableroleb2.jpg