Search:

Or best offer.

Date: 05th April 2012
Username: RMEpowerbox
Full Name: David Leverett
City, State, Zip: Charleston, SC
Contact: dleverett1@gmail.com
Price: $150 shipped

Description:

I have a brand new...

A simple yes or no would have sufficed. It was an honest question. The only "drivel" on this thread is your response.

Are the koni's rebuildable? I know some koni shocks are sealed for life. At 50k miles, I would think someone already got most of the good out of the shocks.

Does it have a .63 a/r exhaust housing?

I pulled the diff out of my a555 to inspect it, and thought all was well. Upon closer inspection, it sounds like one of my bearings has a very small rough spot. No real visible defect, but when I...

I didn't recognize the part number on the pin or pin savers. The pin savers I received are the correct height with no modification! The pin is slightly longer than the stock one. I'll take some...

Well, I picked up my parts from the dealership yesterday. When I decided to replace the spider gear pin and pin retainers, I looked around the web for part numbers, but there were so many different...

Okay, I'm going to reuse the bolts with Loctite Red. How do you hold the carrier while torquing the ring gear bolts? I believe the spec is 80 ft. lbs.

While I'm building the engine for my mini, I pulled the A555 to check the pinion pin in the diff and install the brackets to keep the pin from coming out.
The factory service manual states that the...

This being the case, I might as well bolt the 91'-later knuckles on my stamped control arms. Advance auto parts has the rebuilt calipers for $16.19 + core, in stock locally, and there's a 20% off...

I would be pulling the parts myself too.

Read your article just before seeing this post. I thought that there were different brackets, thanks for the info. I'm fine with swapping the knuckle from a '90 or earlier van. I'll have to swap hubs...

I'm doing the conversion for bigger front brakes on my minivan, and I need the front caliper brackets off of a mini that came with 15" wheels originally, or an '89 Daytona with vented rear discs. Let...

Just got back from the shop. I pulled the brake rotors I bought for my mini. One fits, one doesn't. Unbelievable. Both boxes look the same, both have the same part number. The rotors are the same...

I've had the same experience when I've ordered closeout brake parts. Especially brake pads. I have a few sets of closeout brake pads that should have just been thrown away. Some even look used.

I...

The past few orders I have placed with Rock Auto have been more hassle than ordering parts should ever be. I've received wrong/defective parts on several occasions and have spent more time on the...

I'm interested if sale falls through.

Looks like it has a real s60 cover, not one that has been milled out. Is that correct?

What size turbine wheel is that? Looks like it's been clipped a lot!

Cindy, in case the oil cooler doesn't sell, I'll take it. Since it's probably sold, can you tell me who makes it?

A few weeks back, I ordered some .020 Wiseco pistons for a 2.5 T1 and some other parts. I ordered the pistons online and selected ground shipping. This was on a Tuesday, and I needed them by the...

I would like to see pics. Please send to: rawmotorsports@comcast.net
Who did the porting?

So these are about 42lb injectors?

+20's for what stock injector. I have an '89 TI, so I have 33lb injectors from the factory.