Not to specific, just something that isn't crap and is in good working shape. I would like a boost gauge with vac too. Blow-off can be quiet, loud, as long as it works and no leaks but would like the...
Type: Posts; User: Shelbydaytona91; Keyword(s):
Not to specific, just something that isn't crap and is in good working shape. I would like a boost gauge with vac too. Blow-off can be quiet, loud, as long as it works and no leaks but would like the...
Yeah its a 91. I ended up getting a multimeter and the fuel pump plug showing 13v at start and the fuel pump is showing almost no resistance so I'm going to make a leap of faith and say the fuel pump...
I did just as described and disconnected the coil connector, ran a jumper cable between the positive terminal on the coil and the positive battery post. No change. Moved key to start position and no...
Ah ok that's what I figured I just wanted to double check before I mess something up. I'll give that a try and post the results.
Thanks for your quick response! I'm not sure I follow what you're saying to do though... Apply power from what to where on the coil? And when you say terminal, do you mean the plug on the bottom of...
Hey, STILL trying to get this Daytona running again. Looks like everything should be good. Up until about a week ago fuel pressure was always a happy 55psi at start and always primed up when I put...
I wish it was that, but its actually the section that's attached to block
When reassembling the thermostat housing pieces, I noticed a hairline crack as I was tightening the heater hose threaded piece to the bottom of the head. The crack almost invisible but spreads a tiny...
Well, fixed the problem in about 20 minutes with a dremel, I don't know why I didn't think of that sooner haha.... Fits great now!
No block off plate on the new engine, old engine like I said I'm pretty sure it doesn't either. I'll check when I get home. I'm confused though, why is new engine a CB yet the larger mount style...
I'm almost 100% sure it is CB, it is also the one that came with the car but I don't know if it's original. I do remember a while back buying a motor mount from Napa and it was way to small to fit in...
When trying to install my new 2.5 CB engine into my Daytona, I ran into the issue of the front motor mount bracket bolts not lining up. When I took a closer look, I noticed the flange on the old...
Need a good condition water pump housing (the part that actually bolts to the block). The actual pump is not necessary, nor are the bolts. It is for a '91 Daytona TI, so it is the larger size...
So here's the status update: I'm going to need a new pump lol. I got a couple bits from home depot (Rigid brand, cryo treated, specifically for metal). The 1/16 snapped within a minute (and I was...
Of course with my luck, I broke the only bolt that you can't get to from the other side. But I suppose I'll run by the home depot and grab a better bit and I'll let everyone know how it goes. Thanks...
http://i199.photobucket.com/albums/aa257/ShelbyDaytona91/IMG_0222.jpg
http://i199.photobucket.com/albums/aa257/ShelbyDaytona91/IMG_0225.jpg
Started with a 1/16, made a tiny hole and then just...
Just bought this set, Black and Decker titanium bits for use on steel. Any suggestions on what might work on it?
Getting another one is a worse-case scenario, I rather try to get this one fixed so I don't have to wait on shipping. I just don't understand why my drill bits won't go through whats left of the bolt.
Well I was taking apart my waterpump to rebuild it and of course the head of a bolt snapped off in the housing the process. I tried to drill through the bolt to extract it but I won't make more than...
My '91 engine's pulley appears to be too big of a bolt pattern to fit my new engine's pump I'm putting in. It's supposed to be an '89 but I'm not 100% sure, may be an '88. So I need what ever pulley...
Well couple things here:
He knew we couldn't afford that car (he went under the impression we were trading in my friend's 09 GTI)
He was pumped full of 'roids and was eerily simlar to Brucie...
Nice kill. It looked faster than a 14.4 just spanked the poor little Honda. Sounded like somebody was mowing the lawn next to the camera man :lol:
Well my friend and I have a Tuesday ritual of going up to Jacksonville and test drive as many hot cars as we can manage to get it. I got a Mustang Bullet '08 last week, awesome car! Get one while you...
Email sent.
Near St. Augustine huh? Wonder if I've seen it around...