Search:

Warren did you use lash cap with your cam and if so which one ?

Now i see the front of the block is drilled for coolant ports or you pinning the last open inch of the cyl bore on the thrust side?

So for the most part the old water pump housing outlet is just being used as mounting point now???

I know what most people 8v say the head doest flow past 6500 rpm but the head / upper end i helped BoostGeek build keeped pulling higher trap speeds the higher we Rev'd it we were banging...

you have a bed plate made up or ti wrist pins???

hmmmm some ti wrist pins would just put me over the edge !!!!

ps do you have the part number for the valve lash caps you used with the last cam?

ever thought about a one piece gridle with...

ahh man i need a towel now!!!

parts porn!!!!

OHH you just didn't say that!!!!!!

Warren just wondering what your charge temps are with 50 trim at full song?

Yes i was but also listeing from a laptop speakers suck!!!!

Warren is hard to tell from sound only which is the honda!!!!
nice run!!!

Do not pass go do not collect $200

I would keep them as they will help to stop the air pushing over the outer edge making the wing more functional.

Dam nice work again Warren!!!!

INclosed trailers!!!!!!!

Cars like this arent meant to see the rain and they get washed with glass cleaner and a window clothes.

I kind like the stainless look .

Take a die grinder with bur's and sanding disc and remove material from the inside of the wing.make it paper thin.

Just get out the wet Vac.

NOw take the barreled TB like in the vid and add stand off injection and now your getting into the F1 world.


http://www.youtube.com/watch?v=GeC9gnuQ-dY&feature=player_embedded

...

Great now i got everyone looking for 2 1/2 " ball valves from home hardware store to repladce the TB's:D

YUP!!!
I can take it a little farther and give you a real bad idea!!!
In 88 i was working for Diamond engines and the guy who work there made a alky motor with rotorary barrel valves the...

Warren you need to go to the next upgade and loose the throttle butterflies
and move to a rotating drum with ports cut into the drum so when you rotate them to WOT there is just 4 big...

I wounder how many grams your able to bore out