Thank you. I will get studs and bolts from McMaster
Type: Posts; User: Kevin_Hemenway; Keyword(s):
Thank you. I will get studs and bolts from McMaster
Has anyone ever put studs in for your cam caps? I have a head that has some stripped cam bolt threads. I want to do studs so it is a non issue going forward. Does anyone have any experience putting...
I would like one also probably two
Preignition/Detonation?
I was under the impression rockauto was an approved vendor for this forum. I'm sorry I brought them up just trying to help annother enthusiast get a product somil6to what they wanted.
The last two I bought from rock auto were cast housings not stamped tin like stock very nice in my opinion and very cheap just not as pretty as the fwd one64894
Has anyone made a retainer for the transfer gear nuts? Any photos?
I did get the cardone one but I converted it to a manual rack before I installed it, I couldn't say how good it would have been. Works well as a manual rack in my racecar tho.
I got my last one from rockauto.com
I have a set of msd wires I was wanting to use. I like the taylor ones you linked if I had seen them before I got the msd I would have gone that route.
Does anyone know where to get the terminals for plug wires that clip into the distributor cap?
I am not sure why the angle would be different I cant find any information about compatible gears vs. The grooves
64640
I finally found a set of gears that will work. I found that the rings and pinions come with different grooves in the gears and only certain ones will fit together correctly. After ordering from 4...
I cant find any transmission place that has the 3.05 ring and pinion I need so I will be checking scrap yards does anyone know an easy way to check if a vehicle has the parts without pulling the...
I have ordered 2 separate (20/61) 3.05 ring and pinion sets. Neither of them seem to mesh together. Has anyone had any experience with this.64610
I do have a question. I read on annother post that some of the 1.22 gears need to be machined to work anyone have any knowledge about this?
Doesnt get driven on street. Drag strip only, if I ever make it to one of the MNSDAC meets I will get with you about swapping some gears. I was able to pick up some 1.22 gears today on ebay NOS. They...
I believe all of the xfer gears I have are .91. I am always looking for spare non lockup's I busted up 2 of them last season. Is that not the most common size? My transtar book shows a 1.06 option...
Looking to get my gear ratio lower on my 89 lebaron with the A413 trans. Wondering if any one has or knows of a set of 53/56 xfer gears. And a 12bolt Ring&pinion 20/61
1989--Chrysler Lebaron GTC--2.5L T-II FMIC---A413--Hoosier 225/50R-15DR2--Kevin Hemenway JR-- Kevin_Hemenway--http://www.turbo-mopartimes.com/flags/us.jpg
1.829--8.125@84.16---12.847@103.37...
I did all 4 corners on my 89 lebaron this last February. had to cut and bend all sheet metal to fit, by hand. I used thin cardboard for pattern then transferred to metal. I would recommend using a...
got mine yesterday will install next weekend in A413
I just did mine in my 89 LeBaron i couldn't find any pans anyplace. I ended up making my own out of sheet metal.
http://www.turbo-mopar.com/forums/attachment.php?attachmentid=63771&stc=1
I feel that reducing turbulence can not be a bad thing.
inside i just smoothed out all the bumps and such no runner modifications. I will port match to head when I get it from FWD Motion. I will put temp sensors in both pipes before and after intercooler....