There is a plate on top of the transmsision. Look and find out. Car is 28 years old, anything can be swapped into it.
- - - Updated - - -
Nope. High torque 2.5 turbo got A568. I got one of...
Type: Posts; User: tryingbe; Keyword(s):
There is a plate on top of the transmsision. Look and find out. Car is 28 years old, anything can be swapped into it.
- - - Updated - - -
Nope. High torque 2.5 turbo got A568. I got one of...
Time to order another one.
2.4L sounds so much cheaper and simpler.
That's a lot of words, but what I got from is
Nice. Your 1/8 trap speed is the same as my 1/4 mile trap speed.
Meet is today!
What you seek does not exist.
http://www.thedodgegarage.com/turbo_sae_22.html
http://www.thedodgegarage.com/5digits_electronics.html
I never can get the MPtune to get the factory LM to control the boost the way I wanted. It's too complicated as there are over 30 tables! I don't own a dyno and I feel troubleshoot boost level on the...
https://www.amazon.com/s?k=camber+bolts&i=automotive&ref=nb_sb_noss_2
Cambers bolts seem to be the cheapest and easiest way to go.
Rotates opposite compare to what?
What year engine does your 89 CSX have? If 89, did you not buy a 89 waterpump?
90 and up waterpump have a larger bolt pattern than a 89 pump. You'd...
Leave the big turbo out, use the TII turbo and old tire engine while you learn how to tune.
If WOT, adjust the FuelFullThrottle.
If on throttle but NOT WOT, adjust the FuelPartThrottle.
If no throttle input, adjust the FuelBaseLineFromMap
Depends.
What map sensor are you running? ...
Ewwww, rust!!!
How's the inside of the fuel tank look? If it looks as rusty as the hanger, change the tank and get a new hanger.
The fuel pump parts you have is for a later L body.
...
Is the clip and bushing still on the cable end at the transmission?
Yes. Fits any K based car, Daytona, Shadow, Spirit, Laser, Aries, Sundance, Lancer, Dynasty, 600, and etc.
2 bar map sensor with a MP LM was installed. There was also a 87 LM in the car. Left...
Date: 24th August 2019
Username: tryingbe
Full Name: Harry Lui
City, State, Zip: Mesa, AZ 85204
Contact: tryingbe at yahoo dot com
Everything sold!
It's 10.0 because that's all your wideband can measure.
What size injectors are you using?
This may help.
https://www.turbododge.com/forums/f4/f21/1243450-rich-idle-ostrich-2-0-a.html
What's the vin number?
I'll stick with paper filter.
Paper filter have larger filter area and do a better job to keeps dust/dirty.
https://www.tempechryslerjeepdodge.net/
https://www.billluke.com/
Not sure which is closer to you.
A.J.'s shop have a/c in the customer area.
So, no meet this week?
The element can't pass thru 33004280 sensor
Thanks Todd,
I ran 25psi on 33004280 sensor for a few years with no issue.
I relocated my air charge temperature sensor to the charge pipe after the intercooler, it really helped with heatsoak restart and other heatsoak related issue.
I used 33004280 caged sensor....
Meet is tomorrow!