I am also xdig on eBay if you want to check my feedback there as well. I have never had any negative feedback anywhere. There is some side to side play but no in/out and no smoke. I took it off...
Type: Posts; User: xdig; Keyword(s):
I am also xdig on eBay if you want to check my feedback there as well. I have never had any negative feedback anywhere. There is some side to side play but no in/out and no smoke. I took it off...
I'd say somewhere around 350whp with the right supporting mods.
Turbo has a Chrysler flange.
Rob, I had +40's in it but couldn't adjust fuel pressure low enough to get 11.5:1 at WOT. I swapped in the DSM injectors and was able to adjust AFR at WOT. Problem is that at cruise it is running...
Thanks but I no longer have the stock cal. I got rid of it when I installed the 2.5 but I may be able to borrow one locally.
I also have a FWDP stage 5 that runs even more rich than this cal.
Possible but it was failing emissions (at cruise) before swapping turbo/head/cam. Reading were actually worse before but may have been due to fuel pressure set too high.
50 trim stage 2 wheel and .63 turbine housing.
I had thought of that but I don't have a stock cal.
Cal is set up for 3 bar, +40's, ported 2 pc., ported exhaust with 46 trim stage 2/.63 AR. 2.5" exhaust, ported 782 with Taft S2. No longer running the ported head or Taft but everything else is...
I thought of that but not sure why that is. The cal that I have was for my set-up. Also, I have a stage 5 cal from FWDP that runs even more rich than this one(seems odd that 2 cals that are for my...
I don't remember exactly what it was at cruise but I do know that it was in the 10's. I am working on getting another cal. Thanks again for your help.
Is that done in the cal?
Not yet.
I can't seem to get my SL to pass smog test. I have replaced cap/rotor/wires/O2/injectors(went from +40's to 550cc DSM), and adjusted fuel pressure for 11.5 AFR at WOT. I have also replace cylinder...
$350 plus shipping. I forgot to edit the price back in after I found out that the deal fell through. Thanks, David
Thanks! It spooled great on my SL.
Deal fell through. Turbo is still available.
Injectors are sold. Thanks for the interest. David
I have a good used set of +40's that I just removed from my SL. (pn. 4532586). $100 shipped in the US.
Sale Pending.
18 psi. I don't remember except that it was on a Omni.
Turbonetics 46 trim turbo with T3 compressor housing, Chrysler .63 AR turbine housing and stage 2 wheel. Includes 2.5" SV. I bought it from a forum member about 2 years ago with about 5000 miles on...
I am currently replacing a piston in my 87 SC and I am trying to decide which turbo to put on it while the head is off. It is a common block 2.2 with stock 782 head with 89 turbo roller cam and 33...