Want to buy cam, I'm looking for a super 60 cam, one of Simons regrind cams or a menogon cam. Let me know what you have available
Type: Posts; User: JohnnyIroc; Keyword(s):
Want to buy cam, I'm looking for a super 60 cam, one of Simons regrind cams or a menogon cam. Let me know what you have available
I'll hop on a computer and clear it out, I'll do the trade or 200 shipped
Trade intake for 2 piece?
I'll take a large grey
If he don't I will
Photo not working
its going on a turbo dodge you will see it off at least once a year
did it have a very harsh burnt oil smell
i had the middle length cable in my lancer and figured it all out. no need for a hacksaw, hell no need for any tools at all
so there u have it, to put a later 523 into a l body you need the 555,520...
its to short for the 92 and newer trans
what part of the arm do i cut to adjust it i never looked to much at how there mounted.
solid front and rear mounts will be needed for this, i kinda got nervous with how damn close it was to my firewall too.
well i decided to go out and look at it again, my spacer is too short so i will either extend my spacer or swap to the clutch arm off my old 520 and cable i ran
with that, we will see what i have...
i used a 92 daytona clutch cable and it felt stupid loose i made a spacer between the cable where it mounts to the trans. to shorten it up
the spacer is maybe a 1/2 inch big. i know these are self...
few updates on the car i put off the big plenum intake until i receive my TU header,
http://i745.photobucket.com/albums/xx92/johnmesichTM/20140524_162055.jpg...
is this on your consouler johnny?
Pm box is full, will you sell just the fuel harness
sorry nothing has come with mine yet, on an l body in one spot a have an inch of clearance from the firewall. so its going to be tough to decide where to put vaccum ports.
i want to get the car up...
thank you guys for all the input, i found a 25 pack of the 1/4 terminals on clips and fasteners.
and i may get the fuel clips that requires assembley but what is the proper tool to use to do this...
the fronts are Motegi Track Lites
but the silver lace wheels are MB Mesh X
I wanted the SRT BBS wheels and these where the closest match I could find.
thank you i really like them and i got a...
yeah it sure is and there is no trans in there yet so its not exactly where it will sit but i think i have it pretty close.
i have the ebay strut tower bar made by i think his name was mike...
any 91-93 Daytona or lebaron ash-trey that works as a cup holder will work
would clips and fasteners have the big terminals used on the fuel harness bulk head going into the main engine harness.
I remember years ago you had a writeup on everything you did to make a new harness.
any idea of a good place to source the correct pins for the old style connector.
I would have no problem...
i have used them all i just swap the connector to the one i need, off the top of my head i cannot remember what one i need.
i am interested in whichever one is the most flexable and dose not...