Not sure, but I don't think so. The long sides are strait and square. The short sides are rough and where it would have broken. It is big enough that I am surprised it made it back to the pan. I am...
Type: Posts; User: TJ Schulze; Keyword(s):
Not sure, but I don't think so. The long sides are strait and square. The short sides are rough and where it would have broken. It is big enough that I am surprised it made it back to the pan. I am...
Thanks for the info. I put it on the lift today and it ran up through all gears just as it should. I did have to turn on traction control to do it. With the car in neutral and running i could rotate...
I have a 2008 PT limited turbo. When I put it in either forward or reverse and step on the gas it goes but if I let off the gas it feels like the brakes are on. All four wheels turn freely when I...
It should work. I have been using MPScan Droid with my ASUS Transformer Pad since Wowzer first put it out without any issues. At least if you get it through Amazon you can return it if it don't wok
I finally got this figured out a while back and am just getting back here to update. The problem was the TPS. The new one I bought was the wrong one. I was given one for the non-turbo setup.I found...
did you get this problem figured out? I would be looking for a wire that got knocked loose or a connector unplugged. you can bet it is something simple. check and see if you are getting spark
Update: I was checking my sensors using mpscan and the only thing I saw strange was the output from the o2 sensor. It was going off the scale lean when it boged down. This contradicted the reading...
I reloaded the calibration and the car still operates the same no change no difference. next I think I am going to pull the 60 Way connector and check resistance to all my sensors. I have had issues...
well it has been working really great but I suppose it wouldn't hurt to dump it and reload it and see if that makes a difference. it only takes a couple minutes anyways so I will do that now and take...
okay first off I'm running a modified srt4 Cal but I don't even remember where I picked it up from. this happened right after I had to pull the transmission out and to replace the clutch. I broke my...
this is on a 1990 Dodge Daytona with the factory electronics and a boost button programmable chip. I am running a 2.4 srt4 motor.
when I put the car to the floor weather on the road or in neutral...
Here is a link to the diagram I have. https://www.asuswebstorage.com/navigate/s/BBE5B7DEDC66470292EB338A4207D2A44
Does anyone have a diagram showing how to use relays and a switch to operate the headlight doors??? I have a diagram that uses a momentary 3 way toggle switch and 2 relays, but I cannot get it work....
I setup everything with the android version. It is so simple to do, I am impressed. I like it much better than the windows version, but thats just me.
So far it has worked flawlessly for me. It has...
I am using this on my Asus Transformer running Android 4.2.
This is the link to the file you want Wowzer.
...
I assume the readings i am logging are more aaccurate than my gauges are. My temp gauge reads about a third up and my logging is showing about 202 degrees. Also, is there a way to log A/F? I set up...
That would help. I could measure how much room I got pretty easily. Running it non turbo for now with the stock intake I should be okay. Once I get all the pieces together than the fun will start....
I try to do my own tuning, at least on the hybrid I did. Not sure where to even start on the 2.4 set-up. I will have to see how it goes. Does that intake sit any farther forward the Stratus intake...
I am running the SBEC with a Boost Button programmable chip and I will run the distributor off the head. What do you need for the intake? And I will be running the old school 5 speed.
Thanks for that info . Did you get the e-mail I sent you about your website? I am going to be needing some parts for this job.
The intake I got from the PT is a 2 piece unit
I just did some testing on this motor. The compression is #1 128, #2 124, #3 127, #4 123. I did a quick leak down check and my exhaust valves are leaking a small amount on all four cylinders. I did...
I am finally switching my 1990 Daytona from the hybrid motor to a full 2.4 set-up. I just picked up a 2.4 out of a 2004 PT non-turbo with all the accessories and 58,000 miles on it. Yeah baby, I will...
Please PM me your paypal info and I will send you the money for these tonight. Thanks
I can do $30.00 shipped if you still have them on Friday. That is the price for all 4?
Well, I would not go so far as to say everyone should go out and get Geico insurance, but they have been taking good care of me and my cars and bikes for the last 10 years. I'm pretty happy with...