Search:

Since you can only lay down so much material/filler rod per pass, the welding needs to be done in layers. Think of your manifold like as topographic map. In the 'center areas' where you need the...

So 30 years from now I'm gonna regret using a brown scotchbite disc on my die grinder to clean off old gasket?;) For the past 15 years or so I always put a big fan behind me to blow the...

A 2 piece gasket is right about 2 3/4 X 12 7/8, buy material so as many can fit on your stock as possible. Heck, make 4 and sell 2 of them. Once the waterjet place has the pattern entered in(my...

Im thinking more is more. Still theory at this point tho. I'd go an inch (most ebay stuff seems to be metric?) if L body hood clearance wasn't an issue...

I bolted mine to the lower, cleaned up any disparities with the scroll rolls, then tuned it over and bolted it to the top of the mani and did the same thing with clean up. THen when you bolt it all...

Bummer inn the core shift, mine didnt get thin there bit I HD to lay down a third Layer of molten aluminium in some low spots today to go 60mm consistent

Splitting hairs here Rob. At the bottom of the plenum upper piece its still plenum, at the top of the lower it becomes runner. So the space is somewhere in the middle of that process IMO. Yes the...

They're ready Cordes, I know your busy with offspring but you have dibs if you want one. $150.
Shipped. Cost is admittedly high but the "draw in" process was pricey😣

I'm having 4 "more plenum volume" spacers made, they're at the water jet cutter now, should have them tomorrow. Likely gonna sell 2 to recoup costs.

Pffft, Todd. What's that guy know? I mean other than he has come thru twice for me in the last couple weeks with two different solutions.?.. And maybe a dozen times over the years but other than...

I was doing a little 2 piece porting myself today. Turns out if you want to run a 58mm TB it is a LOT of welding and a LOT of cutting! I had my buddy TIG weld fill it, i did the first port session...