Search:

How much does a complete, bone stock 2.5 T1 weigh? I'm talking long block complete with guts, head, manifiolds and turbo. Thanks.

I'm looking for an e-brake mechanisim. PM me if you've got one.

You will need to pull out the oil galley plugs and clean out all the oil passages with engine cleaning brushes and thoroughly flush out the engire oiling system. Once you've cleaned the crank,...

Well do it how you want but explain to me how you waste less by using a ball valve as opposed to pinching a rubber vacuum hose. By pinching off a larger diameter hose, I find it easy to control the...

Not loving the feel of the non-operation power rack. My dad's rampage had manual steering and the feel was great.

I believe they're basically the same but the daytona k-frame is wider by a couple inches so they won't bolt up.

Yeah that would be the best way, but I haven't had any luck finding a manual rack car at the junkyards. I was hoping to be able to buy a reman rack and get it to work.

You're not going to hydrolock and break parts unless you stick the garden hose down the intake and crank it wide open. If you're that dumb you should be riding bicycle instead of doing car...

The rampage is away in storage right now so I can't go and look at it, but can the coupler easily be removed from the column or will I have to cut it off? Does anyone make the coupler/adapter needed...

Want to convert an 83 rampage from power rack to manual. Don't yet have a manual rack. I'm told the splines on the input shaft of the rack are different for power vs manual. Anyone make an adapter or...

Looking for a turbo engine wiring harness from an 87 or earlier turbo L body omni or charger. Must be able to send pics of the harness, I got screwed once on here buying a harness sight unseen that...

That's the converter inspection plate. You remove the bolts at the bottom of the inpection plate and I had to loosen the motor/transmission mounting bolts on my brother's 83. Then with a little...

Thanks for the weights, that does help. Does the 520 weigh about the same as a 555 or a little less maybe?



Much, much more. I delivered a 413 across the border to a guy and a plastic bin with...

How much does a bare 555 or 520 weigh? Complete transmission minus clutch/flywheel. Anyone weigh one?

Before taking the plunge keep your eyes open. Rampages are worth very little and if you keep your eyes open on ebay, I've seen some very nice ones go for 1000-2500 range. If you buy a junk one to fix...

I talked to a guy who built a race-only n/a 250hp 2.2 back in the day. He said the mopar mags back then showed how to mod a mopar V8 distributor to work in his 2.2. He made a jig to mount the...

Maybe you do, I don't know where you buy your stuff from. I know rock auto even lists 2.2/2.5 fel pro permatorque gaskets.

Yes rings do rotate over time. Finding ring gaps lined up is not uncommon. I've pulled apart a few motors and finding ring gaps occasionally lined up is not a big surprise, even on engines that...

I don't think felpro even makes a graphite gasket anymore. Their base model gasket is now the felpro permatorque. I run the permatorque's on my 440(with aftermarket aluminum heads on an engine that...

Very very clean looking install of that hemi.:thumb:

I agree, running the cutout right after the downpipe is the only sensible way. No reason to run the exhaust though half your exhaust system and dump it at your rear axle. At that point you would be...

I know the design of the distributor changed for 86 and up but will an 86+ dist work with a 85 LM? Or did the dist internals change making this impossible?

Don't have a T2 LM left, closest thing I've got is a 87 T2 intake. AFAIK it should be fine for you if you're looking to socket. I thought for 87 all T1 LM's had the circuit in them to run the updated...

Sorry, sold long ago.

T1 or T2?