If it has roller rocker arms you should have a better chance.
Type: Posts; User: pantera74l; Keyword(s):
If it has roller rocker arms you should have a better chance.
Now that I've converted my GLHS to the SLH 3 brakes I'm hearing that the 11"rear discs are too much for an Omni.Anyone have real life experience with this setup?Thanks
Looking for a source for the hard plastic vacuum lines,and fittings.Not the little packs from Autozone etc.Looking for 25 or 50ft.rolls.Thanks
I'm looking for someone who can socket a 86 logic module for me.I have a logic module,just need it socketed.Thanks
Hi,I'm in need of a socketed logic module for a1986 GLHS.Thanks
anybody know where to getrear trailing axle bushings for an 86 glhs?thanks
Now that Boost Buttons gone is their anyone else out there doing custom cals?Thanks
Wanted;A pair of Koni struts for an 86 GLHS.Rebuildable OK.Thanks
Does it have a Nippon denso alt.i,d be interested in the battery to alt. wiring harness.
anyone have a part no. for a gm 3bar map senser connecter.Thanks
Hi.Is there a source for new plastic wiring harness connectors and plugs for our cars.Thanks
Thanks
I've got an adjustable poly dogbone and can't find reasonably priced windshield sealant
Any thoughts on filling the gaps in the motor mounts with RTV instead of window sealant
the tranny was just rebuilt,no fluid in it.I drilled a 3/8 hole through the case and then used a 3/8 npt tap in the outer hole and a 3/8 plug.
I'd like to drill and tap my 523 for a drain plug'tranny is assembled. so I'd like to know where on the outside of case to drill?Thanks
This is a street car no race gas.I'm using the big NPR Izuzu intercooler
Hi,I'm planning on running 25psi boost and was thinking of adding a Snow Performance stage 2 methanol system.Has anyone used this?Thoughts and ideas would greatly be appreciated
Thank You very much
Hi;Started to take the power steering pump apart on my 86 GHS, to rebuild,the pulley seems to have an allen head bolt in front holding the pulley to the shaft.FSM doesn't show it,just says to use a...
Hi,I need a 5 bolt CB crank pulley with 3 grooves
Because the 2.5 has 1 ribbed pulley and 1 v groove pulley the2.2 has 1 ribbed pulley and 2 vgroove pulleys
,I've just run into a big problem,I'm putting a 2.5 in my glhs and found out the crank hubs are different and the crank snout has different diameter.
Iwas hoHping to swap hubs so I could use the...
Hi;Do you have all the nuts bolts water pump bolt and spacer?How much shipped to WA.Thanks
Hi I need the front wiring harness from a P car(Shadow)that goes from the back of the alternator to the negative side of the battery cable including the...