what would cause that wire to smoke? it is normally a battery hot wire. the only thing i did was mechanical. i did nothing electrical to the car when the engine was out. i can hook a power probe up...
Type: Posts; User: mrchriswray; Keyword(s):
what would cause that wire to smoke? it is normally a battery hot wire. the only thing i did was mechanical. i did nothing electrical to the car when the engine was out. i can hook a power probe up...
does the asd relay also tie into the starter circut? I looked under the car and it seemed like that the starter wires were a little too close to the turbo manifold for comfort
I applied power to the asd relay and the fuel pump ran
I'm trying to get a pic loaded from my iPhone but it won't let me or I can't figure it out. The wire comes from the tan and it splits off. One goes to pin 41 and the other goes to the asd relay. I...
It was a red wire that went to a tan wire and then it went back to red. it passed through two black things that I believe are fusible links.
I have been tentatively working on putting an engine in my 88 shadow. (2.2 Cb with forged crankshaft, forged rods and pistons with arp main and rod studs and Arp headbolts.) I got everything ready to...
Chris Wray- 2 door x2 Arkansas
Another dumb question, does the timing belt jump around when it's tensioned with the 90° trick? I did it last night and it was hoping around an awful lot for my liking.
Well darn. I just got mine for that price in the link. I guess that's what I get for being impatient
Where can you get this tool at?
The belt rides on the outside of the cam gear. I have been wondering how to get the belt in the center of the cam gear
It's more like a squeak and when I herd it I thought I bent valves. I pulled the coil wire before I cranked it and it was sounding fine so I hooked it up and started it and that's when I herd the...
How does it work if you have the air conditioning bracket installed? Sorry for the novice questions. I'm very new to these cars
The crank sprocket is bottomed out and I believe it's a common block. I bought the car from my boss and he had no problems with it until I took the head off to fix the gasket
As you can probably guess from my clever title that my engine is hungry for boost, fuel and timing belts. Yes timing belts. It all began when I replaced the head gasket and the belt that was on it...
What about an intake/exhaust manifold gasket? Are those reusable under the same conditions?
Okay guys I know the very title of this thread makes most want to cringe but I'm in a pinch and need to know for sure either way before I fully commit. Can you reuse a new headgasket? It was put on...
what would it cost for it to leave your hands and enter mine
Is it a shelby valve cover or is it one that says turbo?
While putting the finishing touches on the engine today I managed to break off a corner of the Shelby valve cover. Anyone have one for sale for a reasonable price?
I mean come on, a first birthday party is a little selfish on the kids part. all it really is to showcase how much he drolls and how fast he can fill a diaper. SDAC on the other hand...:banana-mario:
The engine had very low mines on it and ran like a scolded dog. I was thinking cam and valves but I'm open to suggestions. How hard is it to do a cam with it in the car and what's the biggest cam I...
i went and got uv dye and put it in the motor and ran it for a minute and checked all around and found that the number three plug and piston was covered and that can only mean that the headgasket is...
The engine was never overheated but it was ran for short amounts of time with no coolant in it due to the radiator being mounted and the fan being tested. By short amount of time I mean a minute MAX....
I have never ever had the exhaust off and they're isn't evidence of a freeze plug that I can see like I saw with the coolant from the exhaust