Search:

No pressure plate, just the clutch disc. I had the spec pressure plate and ended up going with one of thier plates

Date: 23rd August 2018
Username: drewboy404
Full Name:
City, State, Zip: Charleston, SC, 29407
Contact: drewfens404@gmail.com or on TM
Price: $100, OBO (shipping included)

Description: 4 Puck...

Hello, would you by chance have all four seat belts for a car? If you do and they are in good shape and grey, would you give me a price for the seat belts, the 91 radio bezel and the drivers side...

If I am correct and this was the car at FWD for awhile, the this was the car used to test my engine computer and that is still my old cam sensor left on the head.

My question is why would it matter? I mean I know that welding galvanized puts off a nasty gas, but I weld galvenized steel at work all the time. You grind it back or do what my contractors do, hold...

Talk to boost button. I had the same thing happen to me after i rebuilt my engine. My computer had failed so i got a new one through FWD. The new computer had a car alarm enabled, so the car...

I think you are right. I am going to lean towards the axles for now. Then pop off the diff if I can't find anything else. Getting axles tomorrow after work

Yep.
I did notice one thing, I pulled off the wheels and un-did the axle nuts. I pushed in on the axles to see if one was off-center from eachother. They both have inward movement of about a...

Must have had the rare ones. Well, that wouldnt have been my only componet that didnt fit right or needed alittle talking before working right.

I rolled the car by hand to feel out where the...

I would normally believe that. These fit in really snug. I know your products are great, since everything else on the car was made by you.

Looking at it, i think it has something to do with...

alright, the sway bar is not even attached. as for the control arm bushings, they are poly moog I bought from fwd. they are torqued to 120ft/lbs.

I think I.may look into the steering
if that...

Well after a month of tearing apart the front suspension (weekends). I still have a popping noise. You can even hear an intial pop in the suspension when you lower the car. This is what i did:
...

Thanks all for the help, i found the problem. I re-did everything on the front suspension to see if anything was weird. I just noticed the K-frame was shifted a bit from one side to the other. I...

Actually johnl, you have something here. I am about to take the struts off, and they are not feeling right. Which would be funny if there was any problem with them since i have driven around on...

Well definatly the ball joints or strut mounts, and im leaning towards the strut mounts. wheel bearings are fine. The firewall is fine, i just checked it and painted it. Thanks for the help...

Thanks, I will check the wheels then my mounts. I think there is somthing fishy with the mount on the transmission. Then a slow painful rebuild of the front suspension. Awesome. Gotta tinker to...

Hello, I have a 92 daytona r/t. I changed the front passenger axle out for an unequal setup, have a quaife diff, engine was centered after work. I recently pulled my transmission and replaced the...

I know this is old, but the way i verified it, when my gauge went to crap, was installed a mechanical gauge, then removed the timing belt and turned the intermediate shaft with a drill like priming...

i was lucky through the top. Just keep the engine/trans at an angle trans pointed moredown. Slide transmission under mount then drop engine in. piece of cake :) I had to even do it one time cause...

I have the 3 bar map sensor installed. Wired up, i think correctly. I did try unplugging it to see if that helped but the same thing happened. I have been reading through the powertrain manual to...

I had a friend turned over the motor for a few seconds and checked a spark plug against a ground, sparked like crazy. I pulled off the fuel line to the fuel rail and during the prime a shot of gas...

Well that is a kick in the butt:mad:. Funny thing is my car did not come with an alarm, but my old ecu had kicked the bucket so i got a new one from FWD. I didnt even ask where the computer came...

Here is something interesting that i found. The ignition coil from wells 939 seems to have a different firing order? In accordance with the...

I have double checked that, i had to spin my coil 90 degrees to fit since i have a custom intake manifold, i think i am going to get another coil and find out how to check the crank position sensor

Hello everyone,

Lets start off with :(. I am having problems with starting my R/T. Lets start out with the things that are current:

-No codes except, for 53 due to a cal. Had computer...