It's on. http://sdac.org/
Type: Posts; User: DevoBuzz; Keyword(s):
It's on. http://sdac.org/
OK thanks! I fixed it. Put some foam inside the LM for circuit board and thin cardboard between the LM and chassis surrounded by the bag it was supposed to have. Now on to the next issue. :)
Ah OK guys. Let me check that out. I do have the plastic nuts but maybe the sleeves are gone. So you are saying that is "normal" that when the board touches the case or the case touches the chassis...
Hi guys,
Hope you are all well. Strange issue - I have an 85 SC. Whenever I mount the logic module in the kick panel the car will stall and not start. Apparently when the logic module comes into...
Yes I believe so.
I'm in. 😎 Calibrations are out of my realm of expertise.
1. Bob Gable Wastelands Warrior 91 Spirit R/T
2. Karl Akridge Karlak 88 Daytona
3. Craig Griffin 135sohc 87 P body (csx)
4. Craig Griffin 135sohc 87 P body (csx) One for sure, will buy a second if...
Hi Chris,
Questions pertaining to the L-body T1 (Shelby Charger) radiator:
1. Can you provide the overall dimensions of the radiator - not just the core dimensions? I have a FMIC and the...
I have the TU 6 puck purple plate. Had some chatter when I first installed it. I greatly reduced the chatter by installing a PolyBushings polyurethane front motor mount. FWIW.
Dynomax VT are no longer being made.
I purchased mini van front pads from porterfield a few years ago along with drum shoes for my Shelby charger from them. Like previously stated as long as you have the backing plates they can repad...
Whoops fixed. Got it backwards.
Yeah its a stock cal.
So I replaced the old stock fuel pump with a DeatchWerks DW200 pump. Had some issue with the fuel line leaking in the tank which is now resolved. Now my problem is when in boost the A/F gauge goes...
Excellent. Thanks!!
UPDATE: The hose seemed loose on the fuel line inside the tank. Specifically were it connected to the metal line as it has no barb on the end of it. I think the clamp wasn't tightening down enough...
Its Accufab AFPR. But when I pinched off the return line I still wasn't getting pressure, so I *think* the FPR is OK. Yeah I need to pull the pump out and see if it is leaking at the hanger.
Thanks guys. A little more backstory:
I had the stock 2 pump setup in the car a few months ago - no issues with it. Switched over to the Walbro since the stock pump was 30+ years old. It seemed...
That special r35 or whatever it is - fuel hose. Super expensive submersible hose.
HI everyone,
I replaced the fuel pump on my SC with a Deatschwerks DW200. Ran it for 30 miles and the car didn't seem right. So I went and checked the fuel pressure and got 25 psi. I have a...
Its on first page.
FBC7F19FFC259F
70.4 lbs according to my bathroom scale
Do you have more info on swaybar mod? Link?
#4. What boost level are you running? 18 PSI with manual controller
#5. Did you use a submersible fuel hose with the Walbro? 30R10 rated? Yes / Yes
#6. Fuel filter changed? Yes
OK will get a...
#1. Is the car stock? No. Converted to T2. +20s, Accufab APFR, ported head, TU60 turbo, NPR intercooler, 86/87 GLHS Stage 2 LM
#2. Do you have a wideband o2 sensor? No but I just purchased an...
Hi Todd. I mounted it on the old hanger. This pic doesnt help much but
http://s1256.photobucket.com/user/devobuzz/media/20170627_193636.jpg.html
I was able to put the flared metal line from the...