Search:

Ray,
Can you contact me via messenger?
I took a screen recording for you but I can't post here.



Sent from my KB2005 using Tapatalk

86Shelby,
So when you download the display file it will save it to the SD card on the MPSciLink.
You can then remove the SD card and side load the display.

The file needs to be in the root...

It is probably best to set the default ECU to the one you are working with. But I "think" that might only matter for building layouts, flashing, and the diagnostic tests.

But, there is no harm...

There should be some information displayed that might be helpful to diagnose this. It is available from the Setup screen. Click Info.
Post a picture of this.
Try first what you were doing, then...

thedon809 used his on his Shelby Lancer, and several others have used on their LM cars, but they seem to be a bit more finicky.
Aries_Turbo converted his car over to split SMEC after he had first...

Isn't your van a 90? SBEC?
And the lancer is an 89?

Sent from my KB2005 using Tapatalk

Jon, I really don't think MPSciLink will work properly with a Nextion display attached.
The RTC is integrated on the display, so without it some of the functions that require a time stamp or...

You sir sound like someone who has read the instructions and tips pages!
😉

Sent from my KB2005 using Tapatalk

If you find you want a longer cable for that display, I still have wire and parts for them.
The included test wire is very short.

Sent from my ONEPLUS A6000 using Tapatalk

This one should be the one you need.
Looks like the individual prices have come down a little since the last time I looked. These are a few years old now.

Nextion Enhanced 3.5" HMI Resistive...

Cordes,
Sorry I'm late in seeing this.
Hopefully I can help. I do have a few displays left, but only the 5" and 7".

During the last batch, I really recommended the 3.5" display, because a...

That does look sweet! So far that is the nicest mounting solution I have seen.

Is the 3way switch your selector for powering through ignition or battery? So you can select off?
Have you had any...

I see what you mean now.

Sent from my ONEPLUS A6000 using Tapatalk

You have a picture all lit up? With your ethanol content gauge too?

Sent from my ONEPLUS A6000 using Tapatalk

I was targeting one with a bit wider border, so it would have a bit of flange for mounting if someone wanted to panel mount.
But this isn't terrible and should fit in some of the phone or tablet...

Anyone who was looking for an enclosure for the 5" & 7" Nextion displays, they are now making the enclosures I suggested. These are basically similar to the 3.5" enclosure and offer protection for...

The purchasing is disabled, but there is information on those webpages if you look at the sitemap.
You can look in this forum for the Possible Batch#4 purchase, as we were seeing if there was enough...

Cody, do you mean subsequent attempts to log with the Nextion (AFTER your successful mpscandroid log session) would not log directly from the nextion?

You have to first have a successful log...

I'll do the conformal coating after I test and clean. I ordered some acid brushes and need some more 90% IPA.

Trying to make some progress.
Assembled some SCI-SBEC / SBECII adapters. This is the hardware patch to flash (flashable) SBEC/SBECII with MPSciLink. I need to see if i can test, but been having...

UPDATE: 63901I have received the boards to manufacture the SBEC/SBECII mpscilink flash patch.
I still need to order the other components, but at least we are making progress slowly. I am...

Surprised you didn't special order a Canadian flag silk screen onto your board...

That said, the red one is my personal favourite also. But I do like the blue since all the modules were blue...

To be clear (since you are listed as SBEC), the device will need a hardware patch to flash flashable SBEC's. So currently you can't do it yet. The device is ready for that, but we need some circuit...

As Miles mentioned, we can't see your pics.
But, you need to perform an update of the mpscilink (arduino) with the latest updated MPTune. Morris has made some changes, and although i think you...

And I'm sorry there isn't formal instructions for assembly, other than the tips that have been kicked around.

When i looked at your pic, i thought you unsoldered the factory pins on the bluetooth....