Search:

GLHS60: Cool Rampage! Mine is a 1984 but I have not done the turbo conversion yet. A 2.5 Turbo is in the shop for it. I also have a Turbo minivan and a 2004 PT GT high output. "GOT BOOST?"
...

I am in the process of adapting a MHI TE04-13C turbo to an Opel 1.9 CIH (SOHC) engine.
It will also have EFI and ecu from the same 2.5 turbo Dodge. I have a AFPR to dial back the fuel pressure about...

Frank: The links to your webpage and to the turbo calc program are dead.
Are you going to set up a new web page?
Can I get a copy of the turbo match program? excel spreadsheet?
Dennis Cote in...

How is the project coming?
I assume the 727 is for a big block. You will want a shift kit installed and depending on how you build the engine you may need a high stall converter.
A efi 440 should...

My 84 Rampage worked out OK with minivan brakes, hubs, and knuckle and P body struts using coilover sleeves for a first gen RX7. Minor filing on the strut was needed to allow the coilover sleeve to...

Cold air intake means more dense air = more power.
Exhaust back pressure limits the potential boost available. 2.5 inch diameter for street car or 3 inch if you are building a track machine.

If this would work well on a TII Garrett along with a 3" swingvalve put me down for one each.

I plan on trying the Moroso spiral flow on the turbo Rampage.

I have a Mopar Performance ECU P5249017.
It is supposed to be for a 89 automatic.
Is there an online reference that shows what this ECU does?
IE timing, boost limits fuel curves etc?
Some data...

I would suggest looking at a dual turbo setup.
EFI conversion would also be preferable to a blowthrough carb setup.

I have S body lower control arms, knuckles, spindles & brakes to go on my 1984 Rampage. I have P body struts for it .Will I need to slot the strut holes for this?
Can I use the L body springs...

Pat:
Did your R/T sell?
Dennis L. Cote
Delhi, CA

OOPS! :o
I meant 2.60 OATG
Who can build me a lockup A413 with the '84 transfer gears for the 2.60 OATG?

If anyone is interested I can send you an excel spreadsheet for the A413.
You can then...

Is there any machining needed to put the transfer gears from the 1984 A413 into the 1989 case?
The idea is to get the 2.4 overall top gear ratio for highway MPG.

Can a 1989 A413 from a turbo mini be built to be a lockup trans?
IE turbo guts and lockup on the freeway for best MPG?

> Is there a list of FAQ's somewhere That outlines the hardware and software needed (and suggested sources) to get started in recalibrating ECU's?
>
> The info I have found here indicates that I...

The Fiero Gt mesh wheels will also work with a thin spacer or slight grinding of the caliper.
This gets you 15 x 7 inch and they came in several colors.

What would it cost to ship it to 95315 in central CA?

Dennis L. Cote

I wish you good luck with it!
My 1992 Plymouth Laser RS AWD was very nice when it was running right. Unfortunately that was for about 2 weeks at a time followed by a month or so finding and fixing...

Is there a "how to" for the DOHC 2.4 head on a 2.5 block? Something listing all the bits and pieces and all the modifications and custom parts needed?
Dennis L. Cote