Search:

Up in the air between my CSX and my 87 Shelby Z. I need to reseal the end of the trans on the CSX, it's leaking pretty bad when driving.

Yeah, I have a couple leads, Mine were probably a 9 out of 10 physical condition, maybe a 6-7 cosmetically. I can fix cosmetic, none of mine had any major curb rash which is going to be hard to find....

So I brought the rims in to get the tires replaced and told them multiple times that the rims are a fiberglass composite and they assured me that they change thousands of tires and it wont be a...

Can anyone tell me or better yet get me a picture of what the stock radio looks like? Was it the basic AM/FM or did it have a cassette? I need to put a radio in my csx and would like to find a stock...

How about #205? I'm guessing a non recaro non wide tire car unless someone changed the rack because the lower engine shields are worn through in spots from the tire. With that in mind I'm going to...

The replacement hose only has 2 30-45 degree bends at each connection point

Is the upper radiator hose specific to the 89 CSX or shelby cars? The parts store hoses are the normal two bend hoses not the 3 bend one. The two bend one will work but I want to find the correct 3...

Did the cars with the 225 tires have anything special to accommodate the wider tires or were there just wider tires installed?

So I need to get new tires for the CSX. Was there anything that determined what cars got the wider tires? My rims are 6.5" and the tires on the car currently are 225's. Any suggestions on tires? The...

Man I may see if I can do it on the car. We'll see how much time I have left once everything else is done.

Anyone know how the gfx door molding comes off. One side is faded really bad and I want to remove it to paint it as the door still looks good and I don't want to try and mask it off. I'm hoping it's...

I swear these things were put together with whatever was laying around at the time unless they've all been wrecked. I've looked through pictures I've taken from past SDAC's and every car is different...

Anyone else able to verify what held on the side gfx from Shelby? Plastic ones would be easier.

Anyone have a depth dimension or source for the aluminum rivets that hold the GFX on the side? I know they are 1/4 with a 1/2 head but don't know the exact depth. I looked at the normal hardware...

Yeah I have the poly mounts all around in the daytona with a solid strut preloading the engine and don't find it all that bad. Maybe what I'll plan is to get the parts store ones now to get by and...

I need new motor mounts for the CSX all around, the car won't see much for track duty, mostly car shows and weekend cruises. Maybe an autocross here or there. What are you guys running? I'm thinking...

Ok, I was hoping so and that it wasn't a jacked up repair. The header panel has a crack in it so I'm going to have to fiberglass that up this week also. I cleaned up the motor that's going in and put...

So you know how your average just clean it up and get it ready for SDAC early project snowballs into now the whole front end is off the car, yeah that's where I'm at now. So for those of you that...

In the above pictures I noticed the car has one horn. I've been cleaning up my engine bay and rewrapping the wiring and my car has two horns, Anyone else have this or was this added by a previous...

Congrats man. I take it we'll see it next year?

Mine had the same customization done to it. Every part that was smaller than a quarter was painted red. I replaced the majority of the parts but I still need to find a few. I wrote down the part #s...

If I get on it now mine might be ready for next year.

I'm currently collecting parts to restore my CSX and was wondering what you guys are doing to refurbish your horn button and trunk medalions? Mine have some oxidation on the gold colored parts where...

Could be, the exhaust was replaced but it's isn't overly free flowing, pretty much a factory replacement setup.

This being my first VNT car I'm getting about 14 #'s of boost. I'm assuming there must be a aftermarket computer or could there be a leaky vacuum line? I don't see any obvious line issues to the...